Var god vänta...
Produkten har lagts till i kundvagnen. Se kundvagnen här

Var god vänta...

CISCO 7500SeriesWirelessControllerSupportingAP

Förstasidan / Datorutrustning / Nätverk / Trådlöst nätverk / CISCO 7500SeriesWirelessControllerSupportingAP
CISCO 7500SeriesWirelessControllerSupportingAP (AIR-CT7510-300-K9)

CISCO 7500SeriesWirelessControllerSupportingAP

  • Hastighet 0Mbps
  • Typ Controller
42.534:- / mnd Mer info
373.839,20 ex moms
På lager i butik (Spånga): Ej i lager
Hos leverantören: Ej i lager

Se vad din månadskostnad blir beroende på avbetalningsperiod

Återbetalningstid: 36
Månadskostnad: 15.109,19
Läs mer

Cisco Flex 7500 Series Cloud Controller

The Cisco® Flex 7500 Series Cloud Controller is a highly scalable branch controller for multisite wireless deployments. Deployed in the private cloud the Cisco Flex 7500 Series Controller extends wireless services to distributed branch offices with centralized control that lowers total cost of operations.

The Cisco Flex 7500 Series (Figure 1) can manage wireless access points in up to 500 branch locations and allows IT managers to configure, manage, and troubleshoot up to 2000 access points and 20,000 clients from the data center. The Cisco Flex 7500 Series controller supports secure guest access, rogue detection for Payment Card Industry (PCI) compliance and in-branch (locally switched) Wi-Fi voice and video.

The Cisco Flex 7500 Series Cloud Controller provides centralized control, management, and troubleshooting. It supports the Cisco FlexConnect solution for a lean branch network using access points connected to controllers in the data center over a wide area network. Data traffic from the access points are switched locally at the branch; so in the rare event of a WAN failure at the branch, the wireless clients remain connected on the network with access to local resources within the branch.

The Cisco Flex 7500 Series Cloud Controllers automate wireless configuration and management functions and allows network managers to have the visibility and control needed to cost-effectively manage, secure, and optimize the performance of their branch networks. As a component of the Cisco Unified Wireless Network, this controller provides real-time communication between Cisco Aironet® access points, the Cisco Wireless Control System (WCS), and the Cisco Mobility Services Engine, and is interoperable with other Cisco controllers. With integrated Cisco CleanAir technology, the Cisco Flex 7500 Series provides the industry's only self-healing and self-optimizing wireless network for branches.

Software Licensing Flexibility

Cisco Flex 7500 Series licensing offers the flexibility to add additional access points (up to 2000 access points) as business needs grow.





• Supports 300, 500, 1000, and 2000 access points
• Supports 20,000 clients
• Supports up to 500 branch locations

RF Management

• Provides both real-time and historical information about RF interference impacting network performance across controllers, through systemwide Cisco CleanAir technology integration

Cisco FlexConnect

• Wireless branch deployment for up to 50 access points per branch
• Centralized control, management, and client troubleshooting
• Seamless Layer 2 roaming within a Cisco FlexConnect group of 50 access points
• Seamless client access in the event of a WAN link failure (local data switching)
• Local RADIUS server support to enable new clients to access wireless services without depending on the central RADIUS servers
• Support for high-latency WAN links
• Secure guest access
• Enhanced security with a wireless intrusion prevention system (wIPS)
• Rogue detection for PCI compliance

Comprehensive End-to-End Security

• Offers control and provisioning of wireless access points (CAPWAP)-compliant Datagram Transport Layer Security (DTLS) encryption on the control plane between access points and controllers across remote WAN links

End-to-end Voice

• Supports Cisco Unified Communications for improved collaboration through messaging, presence, and conferencing
• Supports all Cisco Unified Communications wireless IP phones for cost-effective, real-time voice services

Fault Tolerance

• Access points continue to provide seamless services when a controller fails. Provides failover to another backup controller for centralized control and management
• Redundant power supply helps to ensure maximum availability

Environmentally Responsible

• Organizations may choose to turn off access point radios to reduce power consumption during off- peak hours





IEEE 802.11a, 802.11b, 802.11g, 802.11d, WMM/802.11e, 802.11h, 802.11n


IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX specification, 1000BASE-T. 1000BASE-SX, 1000-BASE-LH, IEEE 802.1Q VLAN tagging, and IEEE 802.1AX Link Aggregation

Data Request For Comments (RFC)

• RFC 768 UDP
• RFC 791 IP
• RFC 2460 IPv6 (pass through Bridging mode only)
• RFC 792 ICMP
• RFC 793 TCP
• RFC 826 ARP
• RFC 1122 Requirements for Internet Hosts
• RFC 1519 CIDR
• RFC 1542 BOOTP
• RFC 2131 DHCP
• RFC 5415 CAPWAP Protocol Specification

Security Standards

• IEEE 802.11i (WPA2, RSN)
• RFC 1321 MD5 Message-Digest Algorithm
• RFC 1851 The ESP Triple DES Transform
• RFC 2104 HMAC: Keyed Hashing for Message Authentication
• RFC 2246 TLS Protocol Version 1.0
• RFC 2401 Security Architecture for the Internet Protocol
• RFC 2403 HMAC-MD5-96 within ESP and AH
• RFC 2404 HMAC-SHA-1-96 within ESP and AH
• RFC 2405 ESP DES-CBC Cipher Algorithm with Explicit IV
• RFC 2407 Interpretation for ISAKMP
• RFC 2409 IKE
• RFC 2451 ESP CBC-Mode Cipher Algorithms
• RFC 3280 Internet X.509 PKI Certificate and CRL Profile
• RFC 4347 Datagram Transport Layer Security
• RFC 4346 TLS Protocol Version 1.1


• WEP and TKIP-MIC: RC4 40, 104 and 128 bits (both static and shared keys)
• SSL and TLS: RC4 128-bit and RSA 1024- and 2048-bit

Authentication, Authorization, and Accounting (AAA)

• IEEE 802.1X
• RFC 2548 Microsoft Vendor-Specific RADIUS Attributes
• RFC 2865 RADIUS Authentication
• RFC 2866 RADIUS Accounting
• RFC 2867 RADIUS Tunnel Accounting
• RFC 3576 Dynamic Authorization Extensions to RADIUS
• RFC 3579 RADIUS Support for EAP
• RFC 3580 IEEE 802.1X RADIUS Guidelines
• RFC 3748 Extensible Authentication Protocol
• Web-based authentication
• TACACS support for management users


• SNMP v1, v2c, v3
• RFC 854 Telnet
• RFC 1155 Management Information for TCP/IP-Based Internets
• RFC 1156 MIB
• RFC 1157 SNMP
• RFC 1350 TFTP
• RFC 1643 Ethernet MIB
• RFC 2030 SNTP
• RFC 2616 HTTP
• RFC 2665 Ethernet-Like Interface types MIB
• RFC 2674 Definitions of Managed Objects for Bridges with Traffic Classes, Multicast Filtering, and Virtual Extensions
• RFC 2863 Interfaces Group MIB
• RFC 3164 Syslog
• RFC 3414 User-Based Security Model (USM) for SNMPv3
• RFC 3418 MIB for SNMP
• RFC 3636 Definitions of Managed Objects for IEEE 802.3 MAUs
• Cisco private MIBs

Management Interfaces

• Web-based: HTTP/HTTPS
• Command-line interface: Telnet, Secure Shell (SSH) Protocol, serial port
• Cisco Wireless Control System (WCS)

Interfaces and Indicators

• 2x 10 Gigabit Ethernet interfaces
• Small Form-Factor Pluggable (SFP) options (only Cisco SFPs supported): SFP-10G-SR
• LED indicators: Network Link, Diagnostics
• 1x Service Port: 10/100/1000 Mbps Ethernet (RJ-45)

Physical Dimensions

• Dimensions (WxDxH): 17.30 x 28.00 x 1.69 in. (440.0 x 711.4 x 43.0 mm)
• Weight: 35.1 lbs (15.9 kg) with 2 power supplies

Environmental Conditions

Air temperature:

• Appliance On: 10°C to 35°C (50°F to 95°F); altitude: 0 to 914.4 m (3000 ft),decrease system temperature by 1.0°C for every 1000-foot increase in altitude
• Appliance Off: 5°C to 45°C (41°F to 113°F); maximum altitude: 3048 m (10,000 ft)
• Storage: -40°C to 60°C (-40°F to 140°F); maximum altitude: 3048 m (10,000 ft)


• Appliance On: 20% to 80%; maximum dew point: 21°C; maximum rate of change: 5 °C/hr
• Appliance Off: 8% to 80%; maximum dew point: 27°C

Electrical input:

• Sine-wave input (47 - 63 Hz) required
• Input voltage low range:
• Minimum: 100 V ac
• Maximum: 127 V ac
• Input voltage high range:
• Minimum: 200 V ac
• Maximum: 240 V ac
• Input kilovolt-amperes (kVA), approximately:
• Minimum: 0.090 kVA
• Maximum: 0.700 kVA
• Heat output (Maximum) 2302 Btu per hour (675 watts)
• Acoustical noise emissions:
• Sound power, idling: 6.1 bels maximum
• Sound power, operating: 6.1 bels maximum

Regulatory Compliance

CE Mark


• UL 60950-1:2003
• EN 60950:2000
• EMI and susceptibility (Class A):
• U.S.: FCC Part 15.107 and 15.109
• Canada: ICES-003
• Japan: VCCI
• Europe: EN 55022, EN 55024

Ordering Information

Part Number

Product Name

Cisco SMARTnet® 8x5xNBD


7500 Series Cloud Controller for up to 300 Cisco access points



7500 Series Cloud Controller for up to 500 Cisco access points



7500 Series Cloud Controller for up to 1000 Cisco access points



7500 Series Cloud Controller for up to 2000 Cisco access points


Även om vi gör vårt bästa för att ge relevant information, så är bilderna bara till för att ge ett generellt intryck, och själva varan behöver nödvändigtvis inte se ut precis som på bilden. Om det är skillnader mellan produktöverskrift, beskrivning och bild, så är det produktöverskriften som gäller. (tex. Pc:n kommer inte nödvändigtvis med monitor även om bilden visar det) Om något är oklart skicka en e-post till oss före du beställer! Vi förbehåller oss för tryckfel, ändringar av priser och specifikationer utan varsel.