Var god vänta...


Förstasidan / Datorutrustning / Nätverk / Trådlöst nätverk / ARUBA AP-115 802.11A/B/G/N ACCESS POINT
Produkten är inte längre i vårt sortiment. Vänligen kontakta oss om du behöver hjälp att finna en ersättningsprodukt.
ARUBA AP-115 802.11A/ B/ G/ N ACCESS POINT IN (AP-115)

ARUBA AP-115 802.11A/ B/ G/

  • Hastighet 450Mbps
  • Typ Access point

Aruba 110 Series Access Points

High-performance 802.11n Wi-Fi

High-performance 802.11n access points provide maximum wireless LAN coverage while minimizing RF interference from LTE cellular networks.

These high-performance 802.11n APs deliver wireless data rates up to 450 Mbps per radio and employ three spatial streams to support 50% more throughput and mobile devices than previous-generation APs.

The AP-115 and IAP-115 APs feature a 2.4-GHz and a 5-GHz radio, each with 3×3:3 MIMO and three integrated omni-directional downtilt antennas. The AP-114 and IAP-114 models feature the same radios with three combined and diplexed external antenna connectors.

Advanced Cellular Coexistence (ACC)
The 110 series Advanced Cellular Coexistence (ACC) feature enables Aruba WLANs to perform at peak efficiency by minimizing interference from 3G/4G LTE networks, distributed antenna systems and commercial small-cell/femtocell equipment.

Wi-Fi client optimization
To eliminate sticky client behavior while users roam, the 110 series features patented ClientMatch™ technology, which continuously gathers session performance metrics from mobile devices.
If a mobile device moves out of range of an AP or if RF interference impedes performance, ClientMatch automatically steers the device to a better AP.

Quality of service for Lync
The 110 series APs additionally support priority handling and policy enforcement for individual Microsoft Lync media on the same device, including encrypted videoconferencing, voice, chat and desktop sharing.

Best-in-class RF management
All Aruba APs include Adaptive Radio Management™ technology, which is essential to creating the most reliable, high-performance WLANs. ARM™ manages the 2.4-GHz and 5-GHz radio bands to optimize Wi-Fi client performance and ensures that Aps stay clear of RF interference.
The 110 series can be configured to provide part-time or dedicated air monitoring for spectrum analysis and wireless intrusion protection, VPN tunnels to extend remote locations to corporate resources, and wireless mesh connections where Ethernet drops are not available.

Choose your operating mode
The 110 series of APs offers a choice of operating modes to meet your unique management and deployment requirements.

  • Controller-managed mode. When managed by Aruba Mobility Controllers, 110 series APs offer centralized configuration, data encryption, policy enforcement and network services, as well as distributed and centralized traffic forwarding. Please refer to the Aruba Mobility Controller data sheets for more details.
  • Aruba Instant™ mode. In Aruba Instant mode, a single AP automatically distributes the network configuration to other Instant Aps in the WLAN. Simply power-up on Instant AP, configure it over the air, and plug in the other Aps—the entire process takes about five minutes.

For large installations across multiple sites, the Aruba Activate™ service significantly reduces deployment time by automating device provisioning, firmware upgrades, and inventory management. With Aruba Activate, Instant APs are factory-shipped to any site and configure themselves when powered up.

If WLAN and network requirements change, a built-in migration path allows 110 series Instant APs to become part of a WLAN that is centrally managed by a Mobility Controller.



  • 802.11a/b/g/n controllerless Aruba Instant AP
  • 802.11a/b/g/n Mobility Controller-managed AP
  • Remote AP (RAP)
  • Spectrum analysis identifies sources of RF interference
  • Air monitor provides wireless intrusion protection
  • Hybrid AP serves Wi-Fi clients and provides wireless intrusion protection and spectrum analysis
  • Secure enterprise mesh


  • With an OpenDNS service subscription, Aruba Instant RAPs deliver integrated web filtering, malware and botnet protection to every device connected to the WLAN
  • Integrated Trusted Platform Module (TPM) for secure storage of credentials and keys
  • SecureJack-capable for secure tunneling of wired Ethernet traffic


  • AP type: Indoor, dual radio, 5-GHz and 2.4-GHz 802.11n 3×3:3
  • Software-configurable dual radio supports 5-GHz (Radio 0) and 2.4-GHz (Radio 1)
  • 3×3 MIMO with three spatial streams and up to 450 Mbps wireless data rate
  • Supported frequency bands (country-specific restrictions apply):

­   2.4000 to 2.4835 GHz
­   5.150 to 5.250 GHz
­   5.250 to 5.350 GHz
­   5.470 to 5.725 GHz
­   5.725 to 5.850 GHz

  • Available channels: Dependent on configured regulatory domain
  • Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
  • Supported radio technologies:

­   802.11b: Direct-sequence spread-spectrum (DSSS)
­   802.11a/g/n: Orthogonal frequency-division multiplexing (OFDM)

  • Supported modulation types:

­   802.11b: BPSK, QPSK, CCK
­   802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM

  • Transmit power: Configurable in increments of 0.5 dBm
  • Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):

­   2.4-GHz band: +28 dBm (23 dBm per chain)
­   5-GHz band: +25 dBm (20 dBm per chain)

  • Advanced Cellular Coexistence (ACC) minimizes interference from LTE cellular networks
  • Maximum ratio combining (MRC) for improved receiver performance
  • Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance
  • Short guard interval for 20-MHz and 40-MHz channels
  • Space-time block coding (STBC) for increased range and improved reception
  • Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
  • Supported data rates (Mbps):

­   802.11b: 1, 2, 5.5, 11
­   802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
­   802.11n: 6.5 to 450 (MCS0 to MCS23)

  • 802.11n high-throughput (HT) support: HT 20/40
  • 802.11n packet aggregation: A-MPDU, A-MSDU


  • Maximum power consumption: 13 watts, plus up to 2.5 watts for attached USB device.
  • Power sources sold separately
  • Direct DC source: 12 Vdc nominal, +/- 5%
  • Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af or 802.3at-compliant source

­   USB host port is disabled when using an 802.3af PoE power source; for unrestricted operation with PoE power, use an 802.3at compliant source


  • AP-114: Three RP-SMA connectors for external dual-band antennas. Internal loss between radio interface and external antenna connectors (due to diplexing circuitry): 1.5 dB in 2.4-GHz and 2.5 dB in 5-GHz.
  • AP-115: Six integrated down-tilt omni-directional antennas for 3×3 MIMO with maximum antenna gain of 4.5 dBi in 2.4-GHz and 5.5 dBi in 5-GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of AP-115.


  • 10/100/1000BASE-T Ethernet network interface (RJ-45)

­   Auto-sensing link speed and MDI/MDX
­   802.3az Energy Efficient Ethernet (EEE)
­   PoE-PD: 48 Vdc 802.3af PoE or 802.3at PoE+

  • DC power interface, accepts 1.7/4.0-mm center-positive circular plug with 9.5-mm length
  • USB 2.0 host interface (Type A connector)
  • Serial console interface (RJ-45, TTL levels)
  • Visual indicators (LEDs):

­   Power/system status
­   Ethernet link status (ENET)
­   Radio status (2x; RAD0, RAD1)

  • Kensington security slot
  • Reset button


  • Included with AP:

­   Mounting brackets (2) for attaching to 9/16-inch or 15/16-inch T-bar drop-tile ceiling

  • Optional mounting kits:

­   AP-220-MNT-C2: Aruba AP mount kit contains two ceiling-grid rail adapters for Interlude and Silhouette style rails
­   AP-220-MNT-W1: Aruba AP mount kit contains one flat-surface wall/ceiling mount bracket
­   AP-220-MNT-W2: Aruba AP mount kit contains one flat-surface wall/ceiling secure mount cradle


  • Dimensions/weight (unit, excluding mount accessories):

­   180 mm (W) x 180 mm (D) x 45 mm (H)
­   7.09” (W) x 7.09” (D) x 1.77” (H)
­   650 g (1.43 lbs)

  • Dimensions/weight (shipping):

­   220 mm (W) x 225 mm (D) x 55 mm (H)
­   8.66” (W) x 8.86” (D) x 2.17” (H)
­   880 g (1.94 lbs)


  • Operating:

­   Temperature: 0° C to +50° C (+32° F to +122° F)
­   Humidity: 5% to 95% non-condensing

  • Storage and transportation:

­   Temperature: -40° C to +70° C (-40° F to +158° F)


  • FCC/Industry of Canada
  • CE Marked
  • R&TTE Directive 1995/5/EC
  • Low Voltage Directive 72/23/EEC
  • EN 300 328
  • EN 301 489
  • EN 301 893
  • UL/IEC/EN 60950
  • EN 60601-1-1, EN60601-1-2


  • AP-114 and IAP-114: APIN0114
  • AP-115 and IAP-115: APIN0115


  • CB Scheme Safety, cTUVus
  • UL2043 plenum rating
  • Wi-Fi Alliance (WFA) certified 802.11a/b/g/n


  • Aruba limited lifetime warranty


  • ArubaOS™
  • Aruba InstantOS™

Även om vi gör vårt bästa för att ge relevant information, så är bilderna bara till för att ge ett generellt intryck, och själva varan behöver nödvändigtvis inte se ut precis som på bilden. Om det är skillnader mellan produktöverskrift, beskrivning och bild, så är det produktöverskriften som gäller. (tex. Pc:n kommer inte nödvändigtvis med monitor även om bilden visar det) Om något är oklart skicka en e-post till oss före du beställer! Vi förbehåller oss för tryckfel, ändringar av priser och specifikationer utan varsel.