Var god vänta...

Produkten har lagts till i kundvagnen.Se kundvagnen här
– Billigast på över 7000 artiklar i prisjakt!
– Sveriges bästa datorer i PC för ALLA 2011-2013!
– Telefonsupport & egen verkstad!
– Över 20 år i branschen!
DIN KUNDVAGN
TOTALT: 0:-
Töm kundvagnen

Var god vänta...

Switchar

CISCO
Catalyst 2960 48 10/ 100/ 1000,   4 T/SFP  LAN Base Image

CISCO Catalyst 2960 48 10/ 100/ 1000, 4 T/SFP LAN Base Image (WS-C2960G-48TC-L)

Artikelnr: WS-C2960G-48TC-L
Produkt: Ethernet
Portar: 48
Hastighet: 1Gbps
51.299:-  [41.039,20 ex moms]
 
Köp
På lager i butik (Spånga): Ej i lager
Hos leverantören: 2016-12-23

På lager i butik:– Produkten finns för omgående leverans. Datorpaket har 1-3 dagars leveranstid.

Hos leverantören: Produkten finns på vårt centrallager, beställningsvara upp till 6 dagars leveranstid.

Ej i lager: Produkten finns inte på lager, obekräftad leveranstid.

Preliminärt datum: Produkten förväntas preliminärt angivet datum på centrallagret.

Kontakta oss för mer information: 08-445 77 70
Delbetalning
Betalningsalternativ:
Antal betalningar: 1
Månadskostnad: 51.398:-
Effektiv ränta: 2,34%
Kampanjavgift: 99:-
Adm.avgift / mån: 0:-
Totalbelopp: 51.398:-

Se vad din månadskostnad blir beroende på avbetalningsperiod

Kampanj:
Återbetalningstid: 36
Månadskostnad: 1.695,81
Läs mer
Skriv ut
Betygsätt
Tipsa en vän
4.716:- / mnd


Mer info
Beskrivning

Cisco Catalyst 2960 Switches with LAN Base Software

Cisco® Catalyst® 2960 Series Switches with LAN Base software are a family of fixed-configuration, standalone intelligent Ethernet devices with Power Over Ethernet (PoE) or non-PoE configurations that provide desktop Fast Ethernet and Gigabit Ethernet connectivity, enabling enhanced LAN services for entry-level enterprise, midmarket, and branch office networks. The Cisco Catalyst 2960 LAN Base Series offers integrated security, including Network Admission Control (NAC), advanced quality of service (QoS), and resiliency to deliver intelligent services for the network edge.

The Cisco Catalyst 2960 LAN Base Series offers:
• PoE configurations up to 48 ports
• Intelligent features at the network edge, such as sophisticated access control lists (ACLs) and enhanced security
• Networked Sustainability: Cisco EnergyWise to measure, report and reduce energy usage across the entire organization
• Dual-purpose uplinks for Gigabit Ethernet uplink flexibility, allowing use of either a copper or a fiber uplink; each dual-purpose uplink port has one 10/100/1000 Ethernet port and one Small Form-Factor Pluggable (SFP)-based Gigabit Ethernet port, with one port active at a time
• Network control and bandwidth optimization using advanced QoS, granular rate limiting, ACLs, and multicast services
• Network security through a wide range of authentication methods, data encryption technologies, and NAC based on users, ports, and MAC addresses
• Easy network configuration, upgrades, and troubleshooting using Cisco Network Assistant software
• Autoconfiguration for specialized applications using Auto Smartports
• Limited lifetime hardware warranty
• Software updates at no additional charge

Feature

Description

Cisco Catalyst 2960PD-8TT-L

8 Ethernet 10/100 ports and 1 10/100/1000 PoE input port; compact size with no fan

Cisco Catalyst 2960-8TC-L

8 Ethernet 10/100 ports and 1 dual-purpose uplink port (10/100/1000 or SFP); compact size with no fan

Cisco Catalyst 2960-24TT-L

24 Ethernet 10/100 ports and 2 fixed Ethernet 10/100/1000 uplink ports

Cisco Catalyst 2960-48TT-L

48 Ethernet 10/100 ports and 2 fixed Ethernet 10/100/1000 uplink ports

Cisco Catalyst 2960-24LT-L

24 Ethernet 10/100 ports (PoE supported on 8 ports) and 2 fixed Ethernet 10/100/1000 uplink ports

Cisco Catalyst 2960-24PC-L

24 Ethernet 10/100 PoE ports and 2 dual-purpose uplink ports

Cisco Catalyst 2960-48PST-L

48 Ethernet 10/100 PoE ports with 2 fixed Ethernet 10/100/1000 uplinks and 2 SFP uplinks ports

Cisco Catalyst 2960-24TC-L

24 Ethernet 10/100 ports and 2 dual-purpose uplink ports

Cisco Catalyst 2960-48TC-L

48 Ethernet 10/100 ports and 2 dual-purpose uplink ports

Cisco Catalyst 2960G-8TC-L

8 Ethernet 10/100/1000 ports, 1 of which is dual-purpose; compact size with no fan

Cisco Catalyst 2960G-24TC-L

24 Ethernet 10/100/1000 ports, 4 of which are dual-purpose

Cisco Catalyst 2960G-48-TC-L

48 Ethernet 10/100/1000 ports, 4 of which are dual-purpose

The Cisco Catalyst 2960 LAN Base software image is a rich suite of intelligent services, including advanced QoS, rate limiting, ACLs, and IPv6 management. The SFP-based Gigabit Ethernet ports accommodate a range of SFP transceivers, including the Cisco 1000BASE-SX, 1000BASE-LX, 1000BASE-BX, 1000BASE-ZX, 100BASE-FX, 100BASE-LX, 100BASE-BX, and coarse wavelength-division multiplexing (CWDM) SFP transceivers.

Feature

Benefit

Ease of Use and Deployment

• Express Setup simplifies initial configuration with a Web browser, eliminating the need for more complex terminal emulation programs and CLI knowledge.
• IEEE 802.3af and Cisco prestandard PoE support comes with automatic discovery to detect a Cisco prestandard or IEEE 802.3af endpoint and provide the necessary power without any user configuration.
• Auto Install for configuration and Image update: Simplify management of large number of switches, by automatically downloading specified configuration and image
• DHCP autoconfiguration of multiple switches through a boot server eases switch deployment.
• Automatic QoS (Auto QoS) simplifies QoS configuration in voice-over-IP (VoIP) networks by issuing interface and global switch commands to detect Cisco IP phones, classify traffic, and enable egress queue configuration.
• Autosensing on each 10/100 port detects the speed of the attached device and automatically configures the port for 10- or 100-Mbps operation, easing switch deployment in mixed 10- and 100-Mbps environments.
• Autonegotiating on all ports automatically selects half- or full-duplex transmission mode to optimize bandwidth.
• Dynamic Trunking Protocol (DTP) helps enable dynamic trunk configuration across all switch ports.
• Port Aggregation Protocol (PAgP) automates the creation of Cisco Fast EtherChannel® groups or Gigabit EtherChannel groups to link to another switch, router, or server.
• Link Aggregation Control Protocol (LACP) allows the creation of Ethernet channeling with devices that conform to IEEE 802.3ad. This feature is similar to Cisco EtherChannel technology and PAgP.
• DHCP Server enables a convenient deployment option for the assignment of IP addresses in networks that do not have without a dedicated DHCP server.
• DHCP Relay allows a DHCP relay agent to broadcast DHCP requests to the network DHCP server.
• 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-ZX, 1000BASE-BX, 100BASE-FX, 100BASE-LX, 100BASE-BX, and coarse wavelength-division multiplexing (CWDM) physical interface support through a field-replaceable SFP module provides unprecedented flexibility in switch deployment.
• The default configuration stored in flash memory ensures that the switch can be quickly connected to the network and can pass traffic with minimal user intervention.
• Automatic medium-dependent interface crossover (Auto-MDIX) automatically adjusts transmit and receive pairs if an incorrect cable type (crossover or straight-through) is installed on a copper port.
• Time-domain reflectometer (TDR) to diagnose and resolve cabling problems on copper ports.
• Configuration Rollback provides the capability to replace the current running configuration with any saved Cisco IOS® Software configuration file. This functionality can be used to revert to a previous configuration state, effectively rolling back any configuration changes that were made since that configuration file was saved.
• DHCP Auto Install (Boot Host DHCP) and Auto Image Update allows the switch to automatically download a configuration file and IOS image (future).

Manageability

Superior Manageability

• Cisco IOS Software CLI support provides a common user interface and command set with all Cisco routers and Cisco Catalyst desktop switches.
• IP Service Level Agreement (responder only) uses active monitoring to generate traffic in a continuous, reliable, and predictable manner, thus enabling the measurement of network performance and health.
• Switching Database Manager templates for security and QoS allow administrators to easily adjust memory allocation to the desired features based on deployment-specific requirements.
• VLAN trunks can be created from any port using standards-based 802.1q tagging.
• Up to 255 VLANs per switch and up to 128 spanning-tree instances per switch are supported.
• Four thousand VLAN IDs are supported.
• Voice VLAN simplifies telephony installations by keeping voice traffic on a separate VLAN for easier administration and troubleshooting.
• Cisco VTP supports dynamic VLANs and dynamic trunk configuration across all switches.
• IGMPv3 snooping for IPv4 and MLD v1 and v2 Snooping for IPv6 provide fast client joins and leaves of multicast streams and limits bandwidth-intensive video traffic to only the requestors.
• Remote SPAN (RSPAN) allows administrators to remotely monitor ports in a Layer 2 switch network from any other switch in the same network.
• For enhanced traffic management, monitoring, and analysis, the Embedded Remote Monitoring (RMON) software agent supports four RMON groups (history, statistics, alarms, and events).
• Layer 2 trace route eases troubleshooting by identifying the physical path that a packet takes from source to destination.
• All RMON groups are supported through a SPAN port, which permits traffic monitoring of a single port, or a group of ports, from a single network analyzer or RMON probe.
• Domain Name System (DNS) provides IP address resolution with user-defined device names.
• Trivial File Transfer Protocol (TFTP) reduces the cost of administering software upgrades by downloading from a centralized location.
• Network Timing Protocol (NTP) provides an accurate and consistent timestamp to all intranet switches.
• Multifunction LEDs per port for port status; half-duplex and full-duplex mode; and 10BASE-T, 100BASE-TX, and 1000BASE-T indication as well as switch-level status LEDs for system, and redundant power supply provide a comprehensive and convenient visual management system.
• Cisco Discovery Protocol Versions 1 and 2 help enable automatic switch discovery for network management tools and communicate Voice VLAN information with Cisco IP phones.
• Link Layer Discovery Protocol (LLDP) and LLDP Media Extensions (LLDP-MED) including client location information. Switches exchange link and device information in multivendor networks.
• IPv6 Host provides basic IPv6 management such as IPv4/IPv6 dual stack, unicast address types, ICMPv6, AAAA DNS lookup over IPv4, Secure Shell (SSH) for v6, IPv6 neighbor discovery, CDP, Telnet, TFTP, SNMP, HTTP, HTTPS , Traceroute, syslog for v6.

Cisco Network Assistant Software

• Cisco Network Assistant is a no-charge, Windows-based application that simplifies the administration of networks of up to 250 users. It supports a wide range of Cisco Catalyst intelligent switches. With Cisco Network Assistant, users can manage Cisco Catalyst switches and launch the device managers of Cisco integrated services routers and Cisco Aironet® WLAN access points.
• The easy-to-use graphical interface provides both a topology map and front-panel view of the cluster and stacks.
• Configuration wizards need just a few user inputs to automatically configure the switch to optimally handle different types of traffic: voice, video, multicast, and high-priority data.
• A security wizard is provided to restrict unauthorized access to applications, servers, and networks.
• Upgrading the Cisco IOS Software on Cisco Catalyst switches is a simple matter of pointing and clicking, with one-click upgrades.
• Cisco Network Assistant supports multilayer feature configurations such as routing protocols, ACLs, and QoS parameters.
• Multidevice and multiport configuration capabilities allow administrators to save time by configuring features across multiple switches and ports simultaneously.
• The user-personalized interface allows modification of polling intervals, table views, and other settings.
• Alarm notification provides automated e-mail notification of network errors and alarm thresholds.

Cisco Express Setup

• Express Setup simplifies initial configuration of a switch through a Web browser, eliminating the need for terminal emulation programs and CLI knowledge.
• The Web interface helps less-skilled personnel quickly and simply set up switches, thereby reducing the cost of deployment.

CiscoWorks Support

• CiscoWorks network-management software provides management capabilities on a per-port and per-switch basis, providing a common management interface for Cisco routers, switches, and hubs.
• SNMPv1, v2c, and v3 and Telnet interface support delivers comprehensive in-band management, and a CLI-based management console provides detailed out-of-band management.
• The CiscoWorks LAN Management Solution supports the Cisco Catalyst 2960 Series.

Availability and Scalability

Superior Redundancy for Fault Backup

• IEEE 802.1x Voice-aware security disables the offending data VLAN when a violation is detected without affecting Voice VLAN on the same switch port
• IEEE 802.1x readiness check determines readiness of connected end hosts, before configuring 802.1x on the switch.
• Cisco UplinkFast and BackboneFast technologies help ensure quick failover recovery, enhancing overall network stability and reliability.
• IEEE 802.1w Rapid Spanning Tree Protocol provides rapid spanning-tree convergence independent of spanning-tree timers and the benefit of distributed processing.
• Per-VLAN Rapid Spanning Tree Plus (PVRST+) allows rapid spanning-tree reconvergence on a per-VLAN spanning-tree basis, without requiring the implementation of spanning-tree instances.
• Command-switch redundancy enabled in Cisco Network Assistant software allows designation of a backup command switch that takes over if the primary command switch fails.
• Unidirectional Link Detection Protocol (UDLD) and Aggressive UDLD allow unidirectional links to be detected and disabled to avoid problems such as spanning-tree loops.
• Switch port autorecovery (errdisable) automatically attempts to re-enable a link that is disabled because of a network error.
• Cisco Redundant Power System 2300 (RPS 2300) support provides superior internal power-source redundancy for up to six Cisco networking devices, resulting in improved fault tolerance and network uptime.
• Bandwidth aggregation up to 8 Gbps through Cisco Gigabit EtherChannel technology and up to 800 Mbps through Cisco Fast EtherChannel technology enhances fault tolerance and offers higher-speed aggregated bandwidth between switches and to routers and individual servers.
• Flex Links provides link redundancy with convergence time 100ms without requiring Spanning Tree Protocol.
• VLAN Flex Links load balancing improves network throughput by utilizing both links for traffic distribution for different VLANs.
• Link State Tracking provides Layer 2 redundancy in the network when used in conjunction with server or programmable logic controller (PLC) network interface card (NIC) adapter teaming.

Integrated Cisco IOS Software Features for Bandwidth Optimization

• Per-port broadcast, multicast, and unicast storm control prevents faulty end stations from degrading overall systems performance.
• IEEE 802.1d Spanning Tree Protocol support for redundant backbone connections and loop-free networks simplifies network configuration and improves fault tolerance.
• PVST+ allows for Layer 2 load sharing on redundant links to efficiently use the extra capacity inherent in a redundant design.
• IEEE 802.1s Multiple Spanning Tree Protocol allows a spanning-tree instance per VLAN, enabling Layer 2 load sharing on redundant links.
• Egress committed rate (ECR) guarantee provides load balancing and redundancy.
• Local Proxy Address Resolution Protocol (ARP) works in conjunction with Private VLAN Edge to minimize broadcasts and maximize available bandwidth.
• VLAN1 minimization allows VLAN1 to be disabled on any individual VLAN trunk link.
• VLAN Trunking Protocol (VTP) pruning limits bandwidth consumption on VTP trunks by flooding broadcast traffic only on trunk links required to reach the destination devices.
• Internet Group Management Protocol (IGMP) version 3 snooping provides fast client joins and leaves of multicast streams and limits bandwidth-intensive video traffic to only the requestors.
• IGMP filtering provides multicast authentication by filtering out no subscribers and limits the number of concurrent multicast streams available per port.
• Multicast VLAN registration (MVR) continuously sends multicast streams in a multicast VLAN while isolating e streams from subscriber VLANs for bandwidth and security reasons.

QoS and Control

Advanced QoS

• Standard 802.1p CoS and DSCP field classification are provided, using marking and reclassification on a per-packet basis by source and destination IP address, source and destination MAC address, or Layer 4 TCP or UDP port number.
• Cisco control-plane and data-plane QoS ACLs on all ports help ensure proper marking on a per-packet basis.
• Four egress queues per port enable differentiated management of up to four traffic types.
• SRR scheduling ensures differential prioritization of packet flows by intelligently servicing the ingress and egress queues.
• Weighted tail drop (WTD) provides congestion avoidance at the ingress and egress queues before a disruption occurs.
• Strict priority queuing guarantees that the highest-priority packets are serviced ahead of all other traffic.
• There is no performance penalty for highly granular QoS functions.

Granular Rate Limiting

• The Cisco CIR function guarantees bandwidth in increments as small as 1 Mbps.
• Rate limiting is provided based on source and destination IP address, source and destination MAC address, Layer 4 TCP and UDP information, or any combination of these fields, using QoS ACLs (IP ACLs or MAC ACLs), class maps, and policy maps.
• Asynchronous data flows upstream and downstream from the end station or on the uplink are easily managed using ingress policing and egress shaping.
• Up to 64 aggregate or individual polices are available per Fast Ethernet or Gigabit Ethernet port.

Security

Networkwide Security Features

• IEEE 802.1x allows dynamic, port-based security, providing user authentication.
• IEEE 802.1x with VLAN assignment allows a dynamic VLAN assignment for a specific user regardless of where the user is connected.
• IEEE 802.1x with voice VLAN permits an IP phone to access the voice VLAN irrespective of the authorized or unauthorized state of the port.
• IEEE 802.1x and port security are provided to authenticate the port and manage network access for all MAC addresses, including those of the client.
• IEEE 802.1x with Guest VLAN allows guests without 802.1x clients to have limited network access on the guest VLAN.
• Web authentication for non-802.1x clients allows non-802.1x clients to use an SSL-based browser for authentication.
• MAC Auth Bypass (MAB) for voice allows third-party IP phones without an 802.1x supplicant to get authenticated using their MAC address.
• Port-based ACLs for Layer 2 interfaces allow application of security policies on individual switch ports.
• Unicast MAC filtering prevents the forwarding of any type of packet with a matching MAC address.
• Unknown unicast and multicast port blocking allows tight control by filtering packets that the switch has not already learned how to forward.
• SSHv2 and SNMPv3 provide network security by encrypting administrator traffic during Telnet and SNMP sessions. SSHv2 and the cryptographic version of SNMPv3 require a special cryptographic software image because of U.S. export restrictions.
• Bidirectional data support on the Switched Port Analyzer (SPAN) port allows the Cisco Secure intrusion detection system (IDS) to take action when an intruder is detected.
• TACACS+ and RADIUS authentication enable centralized control of the switch and restrict unauthorized users from altering the configuration.
• MAC address notification allows administrators to be notified of users added to or removed from the network.
• DHCP snooping allows administrators to ensure consistent mapping of IP to MAC addresses. This can be used to prevent attacks that attempt to poison the DHCP binding database, and to rate-limit the amount of DHCP traffic that enters a switch port.
• DHCP Interface Tracker (Option 82) feature augments a host IP address request with the switch port ID.
• Port security secures the access to an access or trunk port based on MAC address.
• After a specific timeframe, the aging feature removes the MAC address from the switch to allow another device to connect to the same port.
• Trusted Boundary provides the ability to trust the QoS priority settings if an IP phone is present and to disable the trust setting if the IP phone is removed, thereby preventing a malicious user from overriding prioritization policies in the network.
• Multilevel security on console access prevents unauthorized users from altering the switch configuration.
• The user-selectable address-learning mode simplifies configuration and enhances security.
• BPDU Guard shuts down Spanning Tree Protocol PortFast-enabled interfaces when BPDUs are received to avoid accidental topology loops.
• Spanning-Tree Root Guard (STRG) prevents edge devices not in the network administrator's control from becoming Spanning Tree Protocol root nodes.
• Voice VLAN aware port security and BPDU Guard allow Voice VLAN traffic to not be disrupted when security violations occur.
• IGMP filtering provides multicast authentication by filtering out no subscribers and limits the number of concurrent multicast streams available per port.
• Dynamic VLAN assignment is supported through implementation of VLAN Membership Policy Server (VMPS) client functions to provide flexibility in assigning ports to VLANs. Dynamic VLAN helps enable the fast assignment of IP addresses.
• Cisco Network Assistant software security wizards ease the deployment of security features for restricting user access to a server as well as to a portion of or the entire network.
• Up to 512 (Aces) are supported, with two profiles: Security (384 Security ACL entries and 128 QoS policies), and QoS (128 Security ACL entries and 384 QoS policies).

Description

Specification

Performance

• 16 Gbps switching fabric (Catalyst 2960PD-8TT-L , Catalyst 2960-8TC-L, Catalyst 2960-24TT-L, Catalyst 2960-24TC-L, Catalyst 2960-24LT-L, Catalyst 2960-24PC-L, Catalyst 2960-48PST-L, Catalyst 2960-48TT-L, Catalyst 2960-48TC-L)
• 32 Gbps switching fabric (Catalyst 2960G-8TC-L, Catalyst 2960G-24TC-L, Catalyst 2960G-48TC-L)
• Forwarding rate based on 64-byte packets:
• Catalyst 2960PD-8TT-L: 2.7 Mpps
• Catalyst 2960-8TC-L: 2.7 Mpps
• Catalyst 2960-24TT-L: 6.5 Mpps
• Catalyst 2960-24TC-L: 6.5 Mpps
• Catalyst 2960-24LT-L: 6.5 Mpps
• Catalyst 2960-24PC-L : 6.5 Mpps
• Catalyst 2960-48TT-L: 10.1 Mpps
• Catalyst 2960-48TC-L: 10.1 Mpps
• Catalyst 2960-48PST-L : 13.3 Mpps
• Catalyst 2960G-8TC-L: 11.9 Mpps
• Catalyst 2960G-24TC-L: 35.7 Mpps
• Catalyst 2960G-48TC-L: 39.0 Mpps
• 64 MB DRAM
• 32 MB flash memory
• Configurable up to 8000 MAC addresses
• Configurable up to 255 IGMP groups
• Configurable maximum transmission unit (MTU) of up to 9000 bytes, with a maximum Ethernet frame size of 9018 bytes (Jumbo frames) for bridging on Gigabit Ethernet ports, and up to 1998 bytes for bridging of Multiprotocol Label Switching (MPLS) tagged frames on both 10/100 and 10/100/1000 ports

Connectors
and Cabling

• 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling
• 100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
• 1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
• 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
• 1000BASE-SX, -LX/LH, -ZX, -BX and CWDM SFP-based ports: LC fiber connectors (single/multimode fiber)
• 100BASE-LX, -BX, -FX: LC fiber connectors (single/multimode fiber).

Power Connectors

• Customers can provide power to a switch by using either the internal power supply or the Cisco RPS 675. The connectors are located at the back of the switch.

Note: The Catalyst 2960-8TC-L and Catalyst 2960G-8TC-L do not have RPS ports.

• Internal-Power-Supply Connector
• The internal power supply is an autoranging unit.
• The internal power supply supports input voltages between 100 and 240VAC.
• Use the supplied AC power cord to connect the AC power connector to an AC power outlet.
• Cisco RPS Connector
• The connector offers connection for an optional Cisco RPS 2300 that uses AC input and supplies DC output to the switch.
• The connector offers a 2300W redundant power system that supports up to six external network devices and provides power to two failed devices at a time.
• The connector automatically senses when the internal power supply of a connected device fails and provides power to the failed device, preventing loss of network traffic.
• Only the Cisco RPS 2300 (model PWR-RPS2300) should be attached to the redundant-power-system receptacle.

Indicators

• Per-port status: Link integrity, disabled, activity, speed, full-duplex
• System status: System, RPS, link status, link duplex, link speed

Dimensions (H x W x D)

• Cisco Catalyst 2960PD-8TT-L : 1.73 x 10.6 x 6.2 in. (4.4 x 27 x 15.7 cm)
• Cisco Catalyst 2960-8TC-L: 1.73 x 10.6 x 6.4 in. (4.4 x 27 x 16.3 cm)
• Cisco Catalyst 2960-24TT-L: 1.73 x 17.5 x 9.3 in. (4.4 x 44.5 x 23.6 cm)
• Cisco Catalyst 2960-48TT-L: 1.73 x 17.5 x 9.3 in. (4.4 x 44.5 x 23.6 cm)
• Cisco Catalyst 2960-24TC-L: 1.73 x 17.5 x 9.3 in. (4.4 x 44.5 x 23.6 cm)
• Cisco Catalyst 2960-24LT-L: 1.73 x 17.5 x 13 in. (4.4 x 44.5 x 33.2 cm)
• Cisco Catalyst 2960-24PC-L : 1.73 x 17.5 x 13 in. (4.4 x 44.5 x 33.2 cm)
• Cisco Catalyst 2960-48PST-L : 1.73 x 17.5 x 13 in. (4.4 x 44.5 x 33.2 cm)
• Cisco Catalyst 2960-48TC-L: 1.73 x 17.5 x 9.3 in. (4.4 x 44.5 x 23.6 cm)
• Cisco Catalyst 2960G-8TC-L: 1.73 x 10.6 x 8.1 in. (4.4 x 27 x 20.5 cm)
• Cisco Catalyst 2960G-24TC-L: 1.73 x 17.5 x 12.9 in. (4.4 x 44.5 x 32.8 cm)
• Cisco Catalyst 2960G-48TC-L: 1.73 x 17.5 x 12.9 in. (4.4 x 44.5 x 32.8 cm)

Weight

• Cisco Catalyst 2960PD-8TT-L: 3 lb (1.4 kg)
• Cisco Catalyst 2960-8TC-L: 3 lb (1.4 kg)
• Cisco Catalyst 2960-24TT-L: 8 lb (3.6 kg)
• Cisco Catalyst 2960-48TT-L: 8 lb (3.6 kg)
• Cisco Catalyst 2960-24TC-L: 8 lb (3.6 kg)
• Cisco Catalyst 2960-24LT-L : 10 lb (4.5 kg)
• Cisco Catalyst 2960-24PC-L : 12 lb (5.4 kg)
• Cisco Catalyst 2960-48PST-L : 12 lb (5.4 kg)
• Cisco Catalyst 2960-48TC-L: 8 lb (3.6 kg)
• Cisco Catalyst 2960G-8TC-L: 3 lb (1.4 kg)
• Cisco Catalyst 2960G-24TC-L: 10 lb (4.5 kg)
• Cisco Catalyst 2960G-48TC-L: 12 lb (5.4 kg)

Environmental Ranges

Normal Operating Conditions:

• -5ºC to +45ºC, up to 5,000 feet (1500 m)
• -5ºC to +40ºC, up to 10,000 feet (3000 m)
• -5ºC to +35ºC, up to 13,000 feet (4000 m)

Short-Term* Exceptional Operating Conditions:

• -5ºC to +55ºC, at sea level
• -5ºC to +50ºC, up to 5,000 feet (1500 m)
• -5ºC to +45ºC, up to 10,000 feet (3000 m)
• -5'C to +40'C, up to 13,000 feet (4000 m)

* Not more than following in one year period: 96 consecutive hours, or 360 hours total, or 15 occurrences

* For Catalyst 2960G-8TC-L, reduce the high range temperature by 5°C

Acoustic Noise

• ISO 7779: Bystander position operating to an ambient temperature of 25°C
• Cisco Catalyst 2960PD-8TT-L: 0 dBa (no fan)
• Cisco Catalyst 2960-8TC-L: 0 dBa (no fan)
• Cisco Catalyst 2960-24TT-L: 40 dBa
• Cisco Catalyst 2960-48TT-L: 40 dBa
• Cisco Catalyst 2960-24TC-L: 40 dBa
• Cisco Catalyst 2960-24LT-L : 48 dBa
• Cisco Catalyst 2960-24PC-L : 48 dBa
• Cisco Catalyst 2960-48PST-L : 48 dBa
• Cisco Catalyst 2960-48TC-L: 40 dBa
• Cisco Catalyst 2960G-8TC-L: 0 dBa (no fan)
• Cisco Catalyst 2960G-24TC-L: 41 dBa
• Cisco Catalyst 2960G-48TC-L: 43 dBa

Mean Time Between Failure (MTBF)

• Cisco Catalyst 2960PD-8TT-L: 737,065 hrs
• Cisco Catalyst 2960-8TC-L: 615,549 hrs
• Cisco Catalyst 2960-24TT-L: 407,707 hrs
• Cisco Catalyst 2960-48TT-L: 339,743 hrs
• Cisco Catalyst 2960-24TC-L: 402,926 hrs
• Cisco Catalyst 2960-24LT-L : 311,781 hrs
• Cisco Catalyst 2960-24PC-L : 243,277 hrs
• Cisco Catalyst 2960-48TC-L: 336,409 hrs
• Cisco Catalyst 2960-48PC-L: 180,427 hrs
• Cisco Catalyst 2960G-8TC-L: 485,576 hrs
• Cisco Catalyst 2960G-24TC-L: 313,828 hrs
• Cisco Catalyst 2960G-48TC-L: 221,432 hrs

AC Input Voltage
and Current

• DC input, 48 VDC, 0.3A (Cisco Catalyst 2960PD-8TT-L),
• (For AC input, use PWR-A= sold separately)
• 100-240VAC (autoranging), 0.5-0.25A, 50-60 Hz (Cisco Catalyst 2960-8TC-L)
• 100-240VAC (autoranging), 0.8-0.4A, 50-60 Hz (Cisco Catalyst 2960G-8TC-L)
• 100-240 VAC (autoranging), 3.0-1.5A, 50-60 Hz (Cisco Catalyst 2960-24LT-L)
• 100-240 VAC (autoranging) 8.0-4.0A, 50-60 Hz (Cisco Catalyst 2960-24PC-L)
• 100-240 VAC (autoranging) 5.0-2.0A, 50-60 Hz (Cisco Catalyst 2960-48PST-L)
• 100-240VAC (autoranging), 1.3-0.8A, 50-60 Hz (Cisco Catalyst 2960-24TT-L and Catalyst 2960-24TC-L and Catalyst 2960-48TT-L and Catalyst 2960-48TC-L)
• 100-240VAC (autoranging), 3.0-1.5A, 50-60 Hz (Cisco Catalyst 2960G-24TC-L and Catalyst 2960G-48TC-L)

Power Rating

• Cisco Catalyst 2960PD-8TT-L : 11 W
• Cisco Catalyst 2960-8TC-L: 0.035 kVA
• Cisco Catalyst 2960-24TT-L: 0.05kVA
• Cisco Catalyst 2960-48TT-L: 0.075kVA
• Cisco Catalyst 2960-24TC-L: 0.05kVA
• Cisco Catalyst 2960-24LT-L : 0.175 kVA
• Cisco Catalyst 2960-24PC-L : 0.470 kVA
• Cisco Catalyst 2960-48PST-L : 0.5 kVA
• Cisco Catalyst 2960-48TC-L: 0.075kVA
• Cisco Catalyst 2960G-8TC-L: 0.05 kVA
• Cisco Catalyst 2960G-24TC-L: 0.075kVA
• Cisco Catalyst 2960G-48TC-L: 0.140kVA

DC Input Voltages (RPS Input)

• (No RPS input for Cisco Catalyst 2960PD-8TT-L , Catalyst 2960-8TC-L and Catalyst 2960G-8TC-L)
• Cisco Catalyst 2960-24TT-L: +12V at 5A
• Cisco Catalyst 2960-48TT-L: +12V at 5A
• Cisco Catalyst 2960-24TC-L: +12V at 5A
• Cisco Catalyst 2960-24LT-L : +12V at 8.3A, -48V at 2.7A
• Cisco Catalyst 2960-24PC-L : +12V at 11.25A, -48V at 7.8A
• Cisco Catalyst 2960-48PST-L : +12V at 4A, -48V at 7.8A
• Cisco Catalyst 2960-48TC-L: +12V at 5A
• Cisco Catalyst 2960G-24TC-L: +12V at 10.5A
• Cisco Catalyst 2960G-48TC-L: +12V at 10.5A

Power Consumption

Description

WS-C2960-24T-L

WS-C2960-8TC-L

WS-C2960-24TC-L

WS-C2960-48TC-L

WS-2960PD-8TT-L

WS-C2960-24TT-L

WS-C2960-48TT-L

5% Throughput

Measured Power Consumption

21W

11W

24W

36W

N/A

26W

38W

Measured Output BTU

71

37

82

122

N/A

86

130

100% Throughput

Measured Power Consumption

22W

12W

27W

39W

11W

28W

42W

Measured Output BTU

75

39

90

133

38

93

141

5% Throughput (with 50% PoE loads)

Measured Power Consumption

N/A

N/A

N/A

N/A

N/A

N/A

N/A

Measured Output BTU

N/A

N/A

N/A

N/A

N/A

N/A

N/A

100% Throughput (with maximum possible PoE loads)

Measured Power Consumption

N/A

N/A

N/A

N/A

N/A

N/A

N/A

Measured Output BTU

N/A

N/A

N/A

N/A

N/A

N/A

N/A

Power Consumption

Description

WS-C2960-24PC-L

WS-C2960-24LT-L

WS-C2960-48PST-L

WS-C2960G-8TC-L

WS-C2960G-24TC-L

WS-C2960G-48TC-L

5% Throughput

Measured Power Consumption

43W

34W

63W

20W

65W

114W

Measured Output BTU

144

114

214

68

219

388

100% Throughput

Measured Power Consumption

45W

36W

67W

22W

72W

123W

Measured Output BTU

151

121

227

75

244

419

5% Throughput (with 50% PoE loads)

Measured Power Consumption

Switch Power: 237W

Switch Power: 98W

Switch Power: 262W

N/A

N/A

N/A

 

PoE Power: 185W

PoE Power: 62W

PoE Power: 187W

     

Measured Output BTU

Switch output:: 175

Switch output:: 122

Switch output:: 253

N/A

N/A

N/A

100% Throughput (with maximum possible PoE loads)

Measured Power Consumption

Switch Power: 433W

Switch Power: 162W

Switch Power: 460W

N/A

N/A

N/A

Measured Output BTU

PoE Power:

PoE Power:

PoE Power: 339W

N/A

N/A

N/A

 

357W

119W

       
 

Switch output:: 171

Switch output:: 66

Switch output:: 208

     

Description

Specification

Safety Certifications

• UL 60950-1, First Edition
• CUL to CAN/CSA 22.2 No. 60950-1, First Edition
• TUV/GS to EN 60950-1, First Edition
• CB to IEC 60950-1 with all country deviations
• AS/NZS 60950-1, First Edition
• CE Marking
• NOM (through partners and distributors)

Electromagnetic Compatibility Certifications

• FCC Part 15 Class A
• EN 55022 Class A (CISPR22)
• EN 55024 (CISPR24)
• AS/NZS CISPR22 Class A
• CE
• CNS13438 Class A
• MIC
• GOST
• China EMC Certifications

Environmental

Reduction of Hazardous Substances (ROHS) 5

Telco

Common Language Equipment Identifier (CLEI) code

Warranty

Limited lifetime warranty

Part Numbers

Description

WS-C2960PD-8TT-L

• 8 Ethernet 10/100 ports and 1 10/100/1000 PoE input port
• Power adaptor (PWR-A=) and power cord sold separately
• Compact size with no fan; magnet included
• LAN Base Image installed

WS-C2960-8TC-L

• 8 Ethernet 10/100 ports and 1 dual-purpose uplink (dual-purpose uplink port has one 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
• Compact size with no fan; magnet included
• LAN Base Image installed

WS-C2960-24TT-L

• 24 Ethernet 10/100 ports and two 10/100/1000TX uplinks
• 1 RU fixed-configuration
• LAN Base Image installed

WS-C2960-48TT-L

• 48 Ethernet 10/100 ports and two 10/100/1000TX uplinks
• 1 RU fixed-configuration
• LAN Base Image installed

WS-C2960-24LT-L

• 24 Ethernet 10/100 ports with 8 PoE ports and two 10/100/1000TX uplinks
• 1 RU fixed-configuration
• LAN Base Image installed

WS-C2960-24PC-L

• 24 Ethernet 10/100 PoE ports and 2 dual-purpose uplinks
• 1 RU fixed-configuration
• LAN Base Image installed

WS-C2960-48PST-L

• 48 Ethernet 10/100 PoE ports and 2 10/100/1000 uplinks and 2 SFP uplinks
• 1 RU fixed-configuration
• LAN Base Image installed

WS-C2960-48TC-L

• 48 Ethernet 10/100 ports and 2 dual-purpose uplinks (each dual-purpose uplink port has one 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
• 1 RU fixed-configuration
• LAN Base Image installed

WS-C2960G-8TC-L

• 7 Ethernet 10/100/1000 ports and 1 dual-purpose uplink (dual-purpose uplink port has one 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
• Compact size with no fan; magnet included
• LAN Base Image installed

WS-C2960G-24TC-L

• 20 Ethernet 10/100/1000 ports and 4 dual-purpose uplinks (each dual-purpose uplink port has one 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
• 1 RU fixed-configuration
• LAN Base Image installed

WS-C2960G-48TC-L

• 44 Ethernet 10/100/1000 ports and 4 dual-purpose uplinks (each dual-purpose uplink port has one 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
• 1 RU fixed-configuration
• LAN Base Image installed

PWR-RPS2300

Cisco Redundant Power System 2300 and Blower,No Power Supply

BLNK-RPS2300= 

Spare Bay Insert for Cisco Redundant Power System 2300

CAB-RPS2300-E=

Spare RPS2300 Cable for Cisco Catalyst 2960-24PC-L and 2960-24LT-L switches

CAB-RPS2300=

Spare RPS2300 Cable for Cisco Catalyst 2960 switches except Catalyst 2960-24PC-L and 2960-24LT-L switches

BLWR-RPS2300=

Spare 45CFM Blower for Cisco Redundant Power System 2300 

C3K-PWR-750WAC=

Catalyst 3750-E/3560-E/RPS 2300 750WAC power supply spare

PWR-A=

Power adaptor for Cisco Catalyst 2960PD-8TT-L compact switch

CBLGRD-C2960-8TC=

Cable guard for the Cisco Catalyst 2960-8TC compact switch

CBLGRD-C2960G-8TC=

Cable guard for the Cisco Catalyst 2960G-8TC compact switch

RCKMNT-19-CMPCT=

Rack-mount for the Cisco Catalyst 2960-8TC and Catalyst 2960G-8TC compact switches

RCKMNT-1RU=

Spare rack-mount kit for the Cisco Catalyst 2960 Series

RCKMNT-REC-1RU=

1 RU recessed rack-mount kit for the Cisco Catalyst 2960 Series

GLC-LH-SM=

1000BASE-LX/LH SFP transceiver module for MMF and SMF, 1300-nm wavelength

GLC-SX-MM=

1000BASE-SX SFP transceiver module for MMF, 850-nm wavelength

GLC-ZX-SM=

1000BASE-ZX SFP transceiver module for SMF, 1550-nm wavelength

GLC-T=

1000BASE-T SFP transceiver module for Category 5 copper wire

Not supported on the Cisco Catalyst 2960-8TC and Catalyst 2960G-8TC
compact switches

GLC-BX-D=

1000BASE-BX10 SFP transceiver module for single strand SMF, 1490-nm TX / 1310-nm RX wavelength

GLC-BX-U=

1000BASE-BX10 SFP transceiver module for single strand SMF, 1310-nm TX / 1490-nm RX wavelength

GLC-GE-100FX=

100BASE-FX SFP module for Gigabit Ethernet ports, 1310-nm wavelength, 2 km over MMF

Not supported on the Cisco Catalyst 2960-8TC and Catalyst 2960G-8TC compact switches

GLC-FE-100FX=

100BASE-FX SFP module for 100-Mb ports, 1310-nm wavelength, 2 km over MMF

GLC-FE-100LX=

100BASE-LX10 SFP module for 100-Mb ports, 1310-nm wavelength, 10 km over SMF

GLC-FE-100BX-D=

100BASE-BX10-D SFP module for 100-Mb ports, 1550-nm TX /1310-nm RX wavelength, 10 km over single-strand SMF

GLC-FE-100BX-U=

100BASE-BX10-U SFP module for 100-Mb ports, 1310-nm TX/1550-nm RX wavelength, 10 km over single-strand SMF

CWDM-SFP-1470=

Cisco CWDM SFP 1470 nm; Gigabit Ethernet and 1G/2G FC (gray)

CWDM-SFP-1490=

Cisco CWDM SFP, 1490 nm; Gigabit Ethernet and 1G/2G FC (violet)

CWDM-SFP-1510=

Cisco CWDM SFP, 1510 nm; Gigabit Ethernet and 1G/2G FC (blue)

CWDM-SFP-1530=

Cisco CWDM SFP, 1530 nm; Gigabit Ethernet and 1G/2G FC (green)

CWDM-SFP-1550=

Cisco CWDM SFP, 1550 nm; Gigabit Ethernet and 1G/2G FC (yellow)

CWDM-SFP-1570=

Cisco CWDM SFP, 1570 nm; Gigabit Ethernet and 1G/2G FC (orange)

CWDM-SFP-1590=

Cisco CWDM SFP, 1590 nm; Gigabit Ethernet and 1G/2G FC (red)

CWDM-SFP-1610=

Cisco CWDM SFP, 1610 nm; Gigabit Ethernet and 1G/2G FC (brown)

CAB-SM-LCSC-1M

1m fiber single-mode LC-to-SC connectors

CAB-SM-LCSC-5M

5m fiber single-mode LC-to-SC connectors

Även om vi gör vårt bästa för att ge relevant information, så är bilderna bara till för att ge ett generellt intryck, och själva varan behöver nödvändigtvis inte se ut precis som på bilden. Om det är skillnader mellan produktöverskrift, beskrivning och bild, så är det produktöverskriften som gäller. (tex. Pc:n kommer inte nödvändigtvis med monitor även om bilden visar det) Om något är oklart skicka en e-post till oss före du beställer! Vi förbehåller oss för tryckfel, ändringar av priser och specifikationer utan varsel.