Var god vänta...

Produkten har lagts till i kundvagnen.Se kundvagnen här
– Billigast på över 7000 artiklar i prisjakt!
– Sveriges bästa datorer i PC för ALLA 2011-2013!
– Telefonsupport & egen verkstad!
– Över 20 år i branschen!
DIN KUNDVAGN
TOTALT: 0:-
Töm kundvagnen

Var god vänta...

Switchar

IBM
Flex System Fabric EN4093R 10Gb Scalable Switch

IBM Flex System Fabric EN4093R 10Gb Scalable Switch (95Y3309)

Artikelnr: 95Y3309
Produkt: Ethernet
Portar: 24
Hastighet: 10Gbps
143.999:-  [115.199,20 ex moms]
 
Köp
På lager i butik (Spånga): Ej i lager
Hos leverantören: 2016-12-20

På lager i butik:– Produkten finns för omgående leverans. Datorpaket har 1-3 dagars leveranstid.

Hos leverantören: Produkten finns på vårt centrallager, beställningsvara upp till 6 dagars leveranstid.

Ej i lager: Produkten finns inte på lager, obekräftad leveranstid.

Preliminärt datum: Produkten förväntas preliminärt angivet datum på centrallagret.

Kontakta oss för mer information: 08-445 77 70

Se vad din månadskostnad blir beroende på avbetalningsperiod

Kampanj:
Återbetalningstid: 36
Månadskostnad: 4.684,80
Läs mer
Skriv ut
Betygsätt
Tipsa en vän
13.143:- / mnd


Mer info
Beskrivning

IBM Flex System Fabric EN4093R 10Gb Scalable Switch


95Y3309

The IBM Flex System™ Fabric EN4093 and EN4093R 10Gb Scalable Switches provide unmatched scalability and performance, while also delivering innovations to help address a number of networking concerns today and providing capabilities that will help you prepare for the future. These switches are capable of supporting up to sixty-four 10 Gb Ethernet connections while offering Layer 2/3 switching. They are designed to install within the I/O module bays of the IBM Flex System Enterprise Chassis. These switches can help clients migrate to a 10 Gb or 40 Gb Ethernet infrastructure and offer virtualization features like Virtual Fabric and VMready®, plus the ability to work with IBM® Distributed Virtual Switch 5000V.

The IBM Flex System™ Fabric EN4093 and EN4093R 10Gb Scalable Switches provide unmatched scalability and performance, while also delivering innovations to help address a number of networking concerns today and providing capabilities that will help you prepare for the future. These switches are capable of supporting up to sixty-four 10 Gb Ethernet connections while offering Layer 2/3 switching. They are designed to install within the I/O module bays of the IBM Flex System Enterprise Chassis. These switches can help clients migrate to a 10 Gb or 40 Gb Ethernet infrastructure and offer virtualization features like Virtual Fabric and VMready®, plus the ability to work with IBM® Distributed Virtual Switch 5000V.

Flexible port licensing for the EN4093/EN4093R allows you to buy only the ports that you need, when you need them. The base switch configuration includes fourteen 10 GbE internal connections and ten 10 GbE uplinks. You then have the flexibility of turning on more 10 GbE internal connections and more 10 GbE or 40 GbE uplinks when you need them using IBM Feature on Demand licensing capabilities that provide “pay as you grow” scalability.
IBM Flex System, a new category of computing and the next generation of Smarter Computing, offers intelligent workload deployment and management for maximum business agility. This chassis delivers high-speed performance complete with integrated servers, storage, and networking for multi-chassis management in data center compute environments. Furthermore, its flexible design can meet the needs of varying workloads with independently scalable IT resource pools for higher utilization and lower cost per workload. Increased security and resiliency protect vital information and promote maximum uptime, and the integrated, easy-to-use management system reduces setup time and complexity, providing a quicker path to ROI.

The EN4093 and EN4093R switches are initially licensed for fourteen 10 Gb internal ports enabled and ten 10 Gb external uplink ports enabled. Further ports can be enabled, including 14 additional internal ports and two 40 Gb external uplink ports with Upgrade 1, and 14 additional internal ports and four additional SFP+ 10 Gb external ports with Upgrade 2 license options. Upgrade 1 must be applied before Upgrade 2 can be applied. Table 1 shows the part numbers for ordering the switches and the upgrades.

Specifications:

  • Internal ports
    • 42 internal full-duplex 10 Gigabit ports. (14 ports are enabled by default. Optional FoD licenses are required to activate the remaining 28 ports.)
    • Two internal full-duplex 1 GbE ports connected to the chassis management module.
  • External ports
    • 14 ports for 1 Gb or 10 Gb Ethernet SFP+ transceivers (support for 1000BASE-SX, 1000BASE-LX, 1000BASE-T, 10GBASE-SR, or 10GBASE-LR) or SFP+ copper direct-attach cables (DAC). Ten ports are enabled by default. An optional FoD license is required to activate the remaining four ports. SFP+ modules and DACs are not included and must be purchased separately.
    • Two ports for 40 Gb Ethernet QSFP+ transceivers or QSFP+ DACs. (Ports are disabled by default. An optional FoD license is required to activate them). QSFP+ modules and DACs are not included and must be purchased separately.
    • One RS-232 serial port (mini-USB connector) that provides an additional means to configure the switch module.
  • Scalability and performance
    • 40 Gb Ethernet ports for extreme uplink bandwidth and performance
    • Fixed-speed external 10 Gb Ethernet ports to leverage 10 Gb core infrastructure
    • Non-blocking architecture with wire-speed forwarding of traffic and aggregated throughput of 1.28 Tbps
    • Media access control (MAC) address learning: automatic update, support for up to 128,000 MAC addresses
    • Up to 128 IP interfaces per switch
    • Static and LACP (IEEE 802.3ad) link aggregation, up to 220 Gb of total uplink bandwidth per switch, up to 64 trunk groups, up to 16 ports per group
    • Support for jumbo frames (up to 9,216 bytes)
    • Broadcast/multicast storm control
    • IGMP snooping to limit flooding of IP multicast traffic
    • IGMP filtering to control multicast traffic for hosts participating in multicast groups
    • Configurable traffic distribution schemes over trunk links based on source/destination IP or MAC addresses, or both
    • Fast port forwarding and fast uplink convergence for rapid STP convergence
  • Availability and redundancy
    • Virtual Router Redundancy Protocol (VRRP) for Layer 3 router redundancy
    • IEEE 802.1D STP for providing L2 redundancy
    • IEEE 802.1s Multiple STP (MSTP) for topology optimization, up to 32 STP instances are supported by a single switch
    • IEEE 802.1w Rapid STP (RSTP) provides rapid STP convergence for critical delay-sensitive traffic like voice or video
    • Per-VLAN Rapid STP (PVRST) enhancements
    • Layer 2 Trunk Failover to support active/standby configurations of network adapter teaming on compute nodes
    • Hot Links provides basic link redundancy with fast recovery for network topologies that require Spanning Tree to be turned off
  • VLAN support
    • Up to 4095 VLANs supported per switch, with VLAN numbers ranging from 1 to 4095 (4095 is used for management module’s connection only.)
    • 802.1Q VLAN tagging support on all ports
    • Private VLANs
  • Security
    • VLAN-based, MAC-based, and IP-based access control lists (ACLs)
    • 802.1x port-based authentication
    • Multiple user IDs and passwords
    • User access control
    • Radius, TACACS+ and LDAP authentication and authorization
  • Quality of Service (QoS)
    • Support for IEEE 802.1p, IP ToS/DSCP, and ACL-based (MAC/IP source and destination addresses, VLANs) traffic classification and processing
    • Traffic shaping and re-marking based on defined policies
    • Eight Weighted Round Robin (WRR) priority queues per port for processing qualified traffic
  • IP v4 Layer 3 functions
    • Host management
    • IP forwarding
    • IP filtering with ACLs, up to 896 ACLs supported
    • VRRP for router redundancy
    • Support for up to 128 static routes
    • Routing protocol support (RIP v1, RIP v2, OSPF v2, BGP-4); up to 2048 entries in a routing table
    • Support for DHCP Relay
    • Support for IGMP snooping and IGMP relay
    • Support for Protocol Independent Multicast (PIM) in Sparse Mode (PIM-SM) and Dense Mode (PIM-DM).
  • IPv6 Layer 3 functions
    • IPv6 host management (except default switch management IP address)
    • IPv6 forwarding
    • Up to 128 static routes
    • Support for OSPF v3 routing protocol
    • IPv6 filtering with ACLs
  • Virtualization
    • Virtual NICs (vNICs)
      • Ethernet, iSCSI, or FCoE traffic is supported on vNICs
    • Unified fabric ports (UFPs)
      • Ethernet or FCoE traffic is supported on UFPs
    • Virtual link aggregation groups (vLAGs)
    • 802.1Qbg Edge Virtual Bridging (EVB) is an emerging IEEE standard for allowing networks to become virtual machine (VM)-aware.
      • Virtual Ethernet Bridging (VEB) and Virtual Ethernet Port Aggregator (VEPA) are mechanisms for switching between VMs on the same hypervisor.
      • Edge Control Protocol (ECP) is a transport protocol that operates between two peers over an IEEE 802 LAN providing reliable, in-order delivery of upper layer protocol data units.
      • Virtual Station Interface (VSI) Discovery and Configuration Protocol (VDP) allows centralized configuration of network policies that will persist with the VM, independent of its location.
      • EVB Type-Length-Value (TLV) is used to discover and configure VEPA, ECP, and VDP.
    • VMready
    • Switch partitioning (SPAR)
  • Converged Enhanced Ethernet
    • Priority-Based Flow Control (PFC) (IEEE 802.1Qbb) extends 802.3x standard flow control to allow the switch to pause traffic based on the 802.1p priority value in each packet’s VLAN tag.
    • Enhanced Transmission Selection (ETS) (IEEE 802.1Qaz) provides a method for allocating link bandwidth based on the 802.1p priority value in each packet’s VLAN tag.
    • Data Center Bridging Capability Exchange Protocol (DCBX) (IEEE 802.1AB) allows neighboring network devices to exchange information about their capabilities.
  • Fibre Channel over Ethernet (FCoE)
    • FC-BB5 FCoE specification compliant
    • FCoE transit switch operations
    • FCoE Initialization Protocol (FIP) support for automatic ACL configuration
  • Stacking
    • Up to eight switches in a stack
    • FCoE support (EN4093R only)
    • vNIC support
    • 802.1Qbg support
  • Manageability
    • Simple Network Management Protocol (SNMP V1, V2 and V3)
    • HTTP browser GUI
    • Telnet interface for CLI
    • SSH
    • Secure FTP (sFTP)
    • Service Location Protocol (SLP)
    • Serial interface for CLI
    • Scriptable CLI
    • Firmware image update (TFTP and FTP)
    • Network Time Protocol (NTP) and Precision Time Protocol (PTP) for switch clock synchronization
  • Monitoring
    • Switch LEDs for external port status and switch module status indication
    • Remote Monitoring (RMON) agent to collect statistics and proactively monitor switch performance
    • Port mirroring for analyzing network traffic passing through switch
    • Change tracking and remote logging with syslog feature
    • Support for sFLOW agent for monitoring traffic in data networks (separate sFLOW analyzer required elsewhere)
    • POST diagnostics
  • The following features are not supported with IPv6:
    • Default switch management IP address
    • SNMP trap host destination IP address
    • Bootstrap Protocol (BOOTP) and DHCP
    • RADIUS, TACACS+ and LDAP
    • QoS metering and re-marking ACLs for out-profile traffic
    • VMware Virtual Center (vCenter) for VMready
    • Routing Information Protocol (RIP)
    • Internet Group Management Protocol (IGMP)
    • Border Gateway Protocol (BGP)
    • Virtual Router Redundancy Protocol (VRRP)
    • sFLOW

Även om vi gör vårt bästa för att ge relevant information, så är bilderna bara till för att ge ett generellt intryck, och själva varan behöver nödvändigtvis inte se ut precis som på bilden. Om det är skillnader mellan produktöverskrift, beskrivning och bild, så är det produktöverskriften som gäller. (tex. Pc:n kommer inte nödvändigtvis med monitor även om bilden visar det) Om något är oklart skicka en e-post till oss före du beställer! Vi förbehåller oss för tryckfel, ändringar av priser och specifikationer utan varsel.