Var god vänta...

Produkten har lagts till i kundvagnen.Se kundvagnen här
– Billigast på över 7000 artiklar i prisjakt!
– Sveriges bästa datorer i PC för ALLA 2011-2013!
– Telefonsupport & egen verkstad!
– Över 20 år i branschen!
DIN KUNDVAGN
TOTALT: 0:-
Töm kundvagnen

Var god vänta...

Switchar

CISCO
Nexus 5548UP 1RU Chassis 32 Fixed Ports

CISCO Nexus 5548UP 1RU Chassis 32 Fixed Ports (N5K-C5548UP-FA)

Artikelnr: N5K-C5548UP-FA
Produkt: Ethernet
Portar: 32
Hastighet: 10Gbps
189.599:-  [151.679,20 ex moms]
 
Köp
På lager i butik (Spånga): Ej i lager
Hos leverantören: 2017-01-05

På lager i butik:– Produkten finns för omgående leverans. Datorpaket har 1-3 dagars leveranstid.

Hos leverantören: Produkten finns på vårt centrallager, beställningsvara upp till 6 dagars leveranstid.

Ej i lager: Produkten finns inte på lager, obekräftad leveranstid.

Preliminärt datum: Produkten förväntas preliminärt angivet datum på centrallagret.

Kontakta oss för mer information: 08-445 77 70

Se vad din månadskostnad blir beroende på avbetalningsperiod

Kampanj:
Återbetalningstid: 36
Månadskostnad: 6.155,11
Läs mer
Skriv ut
Betygsätt
Tipsa en vän
17.289:- / mnd


Mer info
Beskrivning

Cisco Nexus 5548P, 5548UP, 5596UP, and 5596T Switches

The switch series, using cut-through architecture, supports line-rate 10 Gigabit Ethernet on all ports while maintaining consistently low latency independent of packet size and services enabled. It supports a set of network technologies known collectively as Data Center Bridging (DCB) that increases the reliability, efficiency, and scalability of Ethernet networks. These features allow the switches to support multiple traffic classes over a lossless Ethernet fabric, thus enabling consolidation of LAN, SAN, and cluster environments. Its ability to connect Fibre Channel over Ethernet (FCoE) to native Fibre Channel protects existing storage system investments while dramatically simplifying in-rack cabling.

In addition to supporting standard 10 Gigabit Ethernet network interface cards (NICs) on servers, the Cisco Nexus 5000 Series integrates with multifunction adapters called converged network adapters (CNAs) that combine the functions of Ethernet NICs and Fibre Channel host bus adapters (HBAs), making the transition to a single, unified network fabric transparent and consistent with existing practices, management software, and OS drivers. The switch series is compatible with integrated transceivers and Twinax cabling solutions that deliver cost-effective connectivity for 10 Gigabit Ethernet to servers at the rack level, eliminating the need for expensive optical transceivers. The Cisco Nexus 5000 Series portfolio also provides the flexibility to connect directly to servers using 10GBASE-T connections or fiber with Enhanced Small Form-Factor Pluggable (SFP+) transceivers.

The Cisco Nexus 5000 Series is designed for data center environments with cut-through technology that enables consistent low-latency Ethernet solutions, with front-to-back or back-to-front cooling, and with data ports in the rear, bringing switching into close proximity with servers and making cable runs short and simple. The switch series is highly serviceable, with redundant, hot-pluggable power supplies and fan modules. It uses data center-class Cisco® NX-OS Software for high reliability and ease of management.

Cisco Nexus 5548UP Switch
The Cisco Nexus 5548UP (Figure 2) is a 1RU 10 Gigabit Ethernet, Fibre Channel, and FCoE switch offering up to 960 Gbps of throughput and up to 48 ports. The switch has 32 unified ports and one expansion slot.

Cisco Nexus 5596UP Switch
The Cisco Nexus 5596UP Switch (Figure 3) is a 2RU 10 Gigabit Ethernet, Fibre Channel, and FCoE switch offering up to 1920 Gbps of throughput and up to 96 ports. The switch has 48 unified ports and three expansion slots.

Cisco Nexus 5596T Switch
The Cisco Nexus 5596T Switch (Figure 4) is a 2RU form factor, with 32 fixed ports of 10G BASE-T and 16 fixed ports of SFP+. The switch also supports up to three expansion slots. The switch supports 10 Gigabit Ethernet (fiber and copper), Fibre Channel, and FCoE, offering up to 1920 Gbps of throughput and up to 96 ports. The switch supports unified ports on all SFP+ ports. The 10G BASE-T ports support FCoE up to 30m distance with Category 6a and Category 7 cables.

Product Specifications

Performance

• Cisco Nexus 5548P and 5548UP: Layer 2 hardware forwarding at 960 Gbps or 714.24 mpps; Layer 3 performance of up to 160 Gbps or 240 mpps
• Cisco Nexus 5596UP and 5596T: Layer 2 hardware forwarding at 1920 Gbps or 1428 mpps; Layer 3 performance of up to 160 Gbps or 240 mpps
• MAC address table entries: 32,000
• Low-latency cut-through design that provides predictable, consistent traffic latency regardless of packet size, traffic pattern, or enabled features on 10 Gigabit Ethernet interfaces
• Line-rate traffic throughput on all ports

Interfaces

• Cisco Nexus 5548P: 32 fixed 1 and 10 Gigabit Ethernet and FCoE ports; additional interfaces through one expansion module
• Cisco Nexus 5548UP: 32 fixed ports configurable as 1 and 10 Gigabit Ethernet and FCoE or 8/4/2/1-Gbps native Fibre Channel; additional interfaces through one expansion module
• Cisco Nexus 5596UP: 48 fixed ports configurable as 1 and 10 Gigabit Ethernet and FCoE or 8/4/2/1-Gbps native Fibre Channel; additional interfaces through up to three expansion modules
• Cisco Nexus 5596T: 32 fixed ports of 1 and 10G BASE-T and 16 SFP+ fixed ports configurable as 1 and 10 Gigabit Etherent and FCoE or 8/4/2/1-Gbps native Fibre Channel; additional interfaces through up to three expansion modules
• Expansion modules
• 16-port 1 and 10 Gigabit Ethernet and FCoE module
• 8-port 8/4/2/1-Gbps Fibre Channel plus 8-port 1 and 10 Gigabit Ethernet and FCoE module
• Unified port module consisting of 16 ports configurable as 8/4/2/1-Gbps Fibre Channel or 1 and 10 Gigabit Ethernet and FCoE
• 4-port QSFP expansion module
• 12-port 10G BASE-T module (Cisco Nexus 5596T only)
• Layer 3 module (Cisco Nexus 5596UP and 5596T only; one per system)
• Layer 3 daughter card (Cisco Nexus 5548P and 5548UP only; one per system)
• Extension through the Cisco Nexus 2000 Series

Layer 2 Features

• Layer 2 switch ports and VLAN trunks
• IEEE 802.1Q VLAN encapsulation
• Support for up to 4096 VLANs
• Rapid Per-VLAN Spanning Tree Plus (PVRST+) (IEEE 802.1w compatible)
• Multiple Spanning Tree Protocol (MSTP) (IEEE 802.1s): 64 instances
• Spanning Tree PortFast
• Spanning Tree root guard
• Spanning Tree Bridge Assurance
• Cisco EtherChannel technology (up to 16 ports per EtherChannel)
• Cisco vPC technology
• Enhanced vPC enable vPC between Cisco Nexus 5000 and 2000 Series as well as between Cisco Nexus 3000 Series and end host
• vPC configuration synchronization
• Link Aggregation Control Protocol (LACP): IEEE 802.3ad
• Advanced PortChannel hashing based on Layer 2, 3, and 4 information
• Jumbo frames on all ports (up to 9216 bytes)
• Pause frames (IEEE 802.3x)
• Storm control (unicast, multicast, and broadcast)
• Private VLANs
• Private VLAN over trunks (isolated and promiscuous)
• Private VLANs over vPC and EtherChannels
• VLAN Remapping
• Cisco FabricPath
• EvPC and vPC+ with FabricPath
• Cisco Adapter FEX
• Cisco Data Center VM FEX
• Support for up to 24 fabric extenders on each Cisco Nexus 5500 platform

Layer 3 Features

• Layer 3 interfaces: Routed ports on Cisco Nexus 5500 platform interfaces, switch virtual interface (SVI), PortChannels, subinterfaces, and PortChannel subinterfaces for a total of 4096 entries
• Support for up to 8000 prefixes and up to 16000 IPv4 and 8000 IPv6 host entries
• Support for up to 8000 multicast routes
• Support for up to 8000 IGMP groups
• Support for 1000 VRF entries
• Support for up to 4096 VLANs
• 16-way equal-cost multipathing (ECMP)
• 1664 ingress and 2048 egress access control list (ACL) entries
• Routing protocols: Static, Routing Information Protocol Version2 (RIPv2), Enhanced Interior Gateway Routing Protocol (EIGRP), Open Shortest Path First Version 2 (OSPFv2), and Border Gateway Protocol (BGP)
• IPv6 Routing Protocols: Static, Open Shortest Path First Version 3 (OPFv3), Border Gateway Protocol (BGPv6), Enhanced Interior Gateway Routing Protocol (EIGRPv6)
• IPv6 VRF Lite
• Hot-Standby Router Protocol (HSRP) and Virtual Router Redundancy Protocol (VRRP)
• ACL: Routed ACL with Layer 3 and 4 options to match ingress and egress ACL
• Multicast: Protocol Independent Multicast Version 2 (PIMv2) sparse mode, Source Specific Multicast (SSM), Multicast Source Discovery Protocol (MSDP), Internet Group Management Protocol Versions 2, and 3 (IGMP v2, and v3), and Multicast VLAN Registration (MVR)
• Virtual Route Forwarding (VRF): VRF-lite (IP VPN); VRF-aware unicast; and BGP-, OSPF-, RIP-, and VRF-aware multicast
• Unicast Reverse Path Forwarding (uRFP) with ACL; strict and loose modes
• Jumbo frame support (up to 9216 bytes)
• Support for up to 16 fabric extender on each Nexus 5500 with L3 modules
• RFC 896

QoS

• Layer 2 IEEE 802.1p (CoS)
• 8 hardware queues per port
• Per-port QoS configuration
• CoS trust
• Port-based CoS assignment
• Modular QoS CLI (MQC) compliance - IPv4 and IPv6
• ACL-based QoS classification (Layers 2, 3, and 4)
• MQC CoS marking
• Per-port virtual output queuing
• CoS-based egress queuing
• Egress strict-priority queuing
• Egress port-based scheduling: Weighted Round-Robin (WRR)
• Control Plan Policing (CoPP) - IPv4 and IPv6

Security

• Ingress ACLs (standard and extended) on Ethernet and virtual Ethernet ports
• Standard and extended Layer 2 ACLs: MAC addresses, protocol type, etc.
• Standard and extended Layer 3 to 4 ACLs: IPv4 and IPv6, Internet Control Message Protocol (ICMP and ICMPv6), TCP, User Datagram Protocol (UDP), etc.
• VLAN-based ACLs (VACLs)
• Port-based ACLs (PACLs)
• Named ACLs
• Optimized ACL distribution
• ACLs on virtual terminals (VTYs)
• ACL logging on management interface
• Dynamic Host Configuration Protocol (DHCP) snooping with Option 82
• Dynamic Address Resolution Protocol (ARP) Inspection
• IP source guard
• DHCP relay
• Cisco CTS (Authentication and Policy download from ACS)
• Ethernet Port Security
• IPv6 RACL
• IPv6 PACL
• IPv6 VACL

High-Availability Features

• In-Service Software Upgrade (ISSU) for Layer 2
• Hot-swappable field-replaceable power supplies, fan modules, and expansion modules
• 1:1 power redundancy
• N:1 fan module redundancy

Management

• Switch management using 10/100/1000-Mbps management or console ports
• CLI-based console to provide detailed out-of-band management
• In-band switch management
• Locator and beacon LEDs on Cisco Nexus 2000 Series
• Port-based locator and beacon LEDs
• Configuration synchronization
• Module preprovisioning
• Configuration rollback
• Secure Shell Version 2 (SSHv2)
• Telnet
• AAA
• AAA with RBAC
• RADIUS
• TACACS+
• Syslog (8 servers)
• Embedded packet analyzer
• SNMPv1, v2, and v3 (IPv4 & IPv6)
• Enhanced SNMP MIB support
• XML (NETCONF) support
• Remote monitoring (RMON)
• Advanced Encryption Standard (AES) for management traffic
• Unified username and passwords across CLI and SNMP
• Microsoft Challenge Handshake Authentication Protocol (MS-CHAP)
• Digital certificates for management between switch and RADIUS server
• Cisco Discovery Protocol Versions 1 and 2
• RBAC
• Switched Port Analyzer (SPAN) on physical, PortChannel, VLAN, and Fibre Channel interfaces
• Encapsulated Remote SPAN (ERSPAN)
• Ingress and egress packet counters per interface
• Network Time Protocol (NTP)
• Cisco GOLD
• Comprehensive bootup diagnostic tests
• Call Home
• Smart Call Home
• Cisco Fabric Manager
• Cisco DCNM
• CiscoWorks LAN Management Solution (LMS)

Data Center Bridging

• CEE- and IEEE-compliant PFC (per-priority Pause frame support)
• PFC link distance support: 3000m
• CEE-compliant DCBX Protocol
• CEE- and IEEE-compliant Enhanced Transmission Selection

Fibre Channel and FCoE Features (Requires Storage Services License)

• T11 standards-compliant FCoE (FC-BB-5)
• T11 FCoE Initialization Protocol (FIP) (FC-BB-5)
• Any 10 Gigabit Ethernet port configurable as FCoE
• SAN administration separate from LAN administration
• FCP
• Fibre Channel forwarding (FCF)
• Fibre Channel standard port types: E, F, and NP
• Fibre Channel enhanced port types: VE, TE, and VF
• F-port trunking
• F-port channeling
• Direct attachment of FCoE and Fibre Channel targets
• Up to 240 buffer credits per native Fibre Channel port
• Up to 32 VSANs per switch
• Fibre Channel (SAN) PortChannel
• Native Interop Mode 1
• Native Interop Mode 2
• Native Interop Mode 3
• Native Interop Mode 4
• VSAN trunking
• Fabric Device Management Interface (FDMI)
• Fibre Channel ID (FCID) persistence
• Distributed device alias services
• In-order delivery
• Port tracking
• Cisco N-Port Virtualization (NPV) technology
• N-port identifier virtualization (NPIV)
• Fabric services: Name server, registered state change notification (RSCN), login services, and name-server zoning
• Per-VSAN fabric services
• Cisco Fabric Services
• Diffie-Hellman Challenge Handshake Authentication Protocol (DH-CHAP) and Fibre Channel Security Protocol (FC-SP)
• Distributed device alias services
• Host-to-switch and switch-to-switch FC-SP authentication
• Fabric Shortest Path First (FSPF)
• Fabric binding for Fibre Channel
• Standard zoning
• Port security
• Domain and port
• Enhanced zoning
• SAN PortChannels
• Cisco Fabric Analyzer
• Fibre Channel traceroute
• Fibre Channel ping
• Fibre Channel debugging
• Cisco Fabric Manager support
• Storage Management Initiative Specification (SMI-S)
• Boot from SAN over VPC/EVPC

SNMP MIBs

Generic MIBs

• SNMPv2-SMI
• CISCO-SMI
• SNMPv2-TM
• SNMPv2-TC
• IANA-ADDRESS-FAMILY-NUMBERS-MIB
• IANAifType-MIB
• IANAiprouteprotocol-MIB
• HCNUM-TC
• CISCO-TC
• SNMPv2-MIB
• SNMP-COMMUNITY-MIB
• SNMP-FRAMEWORK-MIB
• SNMP-NOTIFICATION-MIB
• SNMP-TARGET-MIB
• SNMP-USER-BASED-SM-MIB
• SNMP-VIEW-BASED-ACM-MIB
• CISCO-SNMP-VACM-EXT-MIB

Layer 3 MIBs

• UDP-MIB
• TCP-MIB
• OSPF-MIB
• BGP4-MIB
• CISCO-HSRP-MIB

Fibre Channel MIBs

• CISCO-ST-TC
• CISCO-FC-FE-MIB
• CISCO-FCSP-MIB
• CISCO-PORT-TRACK-MIB
• CISCO-PSM-MIB
• CISCO-FC-SPAN-MIB
• CISCO-PORT-CHANNEL-MIB
• CISCO-RSCN-MIB
• CISCO-NS-MIB
• CISCO-FCS-MIB
• CISCO-DM-MIB
• FIBRE-CHANNEL-FE-MIB
• CISCO-FC-ROUTE-MIB
• CISCO-FSPF-MIB
• CISCO-ZS-MIB
• CISCO-ZS-EXT-MIB
• CISCO-VSAN-MIB
• CISCO-CFS-MIB
• CISCO-FCPING-MIB
• CISCO-FCTRACEROUTE-MIB
• CISCO-FDMI-MIB
• CISCO-FC-DEVICE-ALIAS-MIB
• CISCO-WWNMGR-MIB
• FCMGMT-MIB
• CISCO-VEDM-MIB
• CISCO-FCOE-MIB

Ethernet MIBs

• CISCO-VLAN-MEMBERSHIP-MIB
• CISCO-Virtual-Interface-MIB

Configuration MIBs

• ENTITY-MIB
• IF-MIB
• CISCO-ENTITY-EXT-MIB
• CISCO-ENTITY-FRU-CONTROL-MIB
• CISCO-ENTITY-SENSOR-MIB
• CISCO-FLASH-MIB
• CISCO-SYSTEM-MIB
• CISCO-SYSTEM-EXT-MIB
• CISCO-IP-IF-MIB
• CISCO-IF-EXTENSION-MIB
• CISCO-SERVER-INTERFACE-MIB
• CISCO-NTP-MIB
• CISCO-IMAGE-MIB
• CISCO-IMAGE-CHECK-MIB
• CISCO-IMAGE-UPGRADE-MIB
• CISCO-CONFIG-COPY-MIB
• CISCO-ENTITY-VENDORTYPE-OID-MIB
• CISCO-BRIDGE-MIB

Monitoring MIBs

• DIFFSERV-DSCP-TC
• NOTIFICATION-LOG-MIB
• DIFFSERV-MIB
• CISCO-CALLHOME-MIB
• CISCO-SYSLOG-EXT-MIB
• CISCO-PROCESS-MIB
• RMON-MIB
• CISCO-RMON-CONFIG-MIB
• CISCO-HC-ALARM-MIB

Security MIBs

• CISCO-AAA-SERVER-MIB
• CISCO-AAA-SERVER-EXT-MIB
• CISCO-COMMON-ROLES-MIB
• CISCO-COMMON-MGMT-MIB
• CISCO-RADIUS-MIB
• CISCO-SECURE-SHELL-MIB
• TCP/IP MIBs
• INET-ADDRESS-MIB
• TCP-MIB
• CISCO-TCP-MIB
• UDP-MIB
• IP-MIB
• CISCO-IP-PROTOCOL-FILTER-MIB
• CISCO-DNS-CLIENT-MIB
• CISCO-PORTSECURITY- MIB

Miscellaneous MIBs

• START-MIB
• CISCO-LICENSE-MGR-MIB
• CISCO-FEATURE-CONTROL-MIB
• CISCO-CDP-MIB
• CISCO-RF-MIB
• CISCO-ETHERNET-FABRIC-EXTENDER-MIB
• CISCO-BRIDGE-MIB

Standards

Industry Standards

• IEEE 802.1D: Spanning Tree Protocol
• IEEE 802.1p: CoS prioritization
• IEEE 802.1Q: VLAN tagging
• IEEE 802.1Qaz: Enhanced transmission selection
• IEEE 802.1Qbb: Per-priority Pause
• IEEE 802.1s: Multiple VLAN instances of Spanning Tree Protocol
• IEEE 802.1w: Rapid reconfiguration of Spanning Tree Protocol
• IEEE 802.3: Ethernet
• IEEE 802.3ad: LACP with fast timers
• IEEE 802.3ae: 10 Gigabit Ethernet
• SFF 8431 SFP+ CX1 support
• RMON
• IEEE 1588-2008: Precision Time Protocol (Boundary Clock)

Fibre Channel Standards

• FC-PH, Revision 4.3 (ANSI/INCITS 230-1994)
• FC-PH, Amendment 1 (ANSI/INCITS 230-1994/AM1 1996)
• FC-PH, Amendment 2 (ANSI/INCITS 230-1994/AM2-1999)
• FC-PH-2, Revision 7.4 (ANSI/INCITS 297-1997)
• FC-PH-3, Revision 9.4 (ANSI/INCITS 303-1998)
• FC-PI, Revision 13 (ANSI/INCITS 352-2002)
• FC-PI-2, Revision 10 (ANSI/INCITS 404-2006)
• FC-PI-4, Revision 7.0
• FC-FS, Revision 1.9 (ANSI/INCITS 373-2003)
• FC-FS-2, Revision 0.91
• FC-LS, Revision 1.2
• FC-SW-2, Revision 5.3 (ANSI/INCITS 355-2001)
• FC-SW-3, Revision 6.6 (ANSI/INCITS 384-2004)
• FC-GS-3, Revision 7.01 (ANSI/INCITS 348-2001)
• FC-GS-4, Revision 7.91 (ANSI/INCITS 387-2004)
• FC-BB-5, Revision 2.0 for FCoE
• FCP, Revision 12 (ANSI/INCITS 269-1996)
• FCP-2, Revision 8 (ANSI/INCITS 350-2003)
• FCP-3, Revision 4 (ANSI/INCITS 416-2006)
• FC-MI, Revision 1.92 (INCITS TR-30-2002, except for FL-ports and Class 2)
• FC-MI-2, Revision 2.6 (INCITS TR-39-2005, except for FL-ports and Class 2)
• FC-SP, Revision 1.6
• FC-DA, Revision 3.1 (INCITS TR-36-2004, except for FL-ports, SB-ports and Class 2)
• Class of Service: Class 3, Class F
• Fibre Channel standard port types: E and F
• Fibre Channel enhanced port types: SD and TE

Physical Specifications

SFP+ Optics

Cisco Nexus 5500 platform supports 10 Gigabit Ethernet SFP+ copper Twinax cables for short distances and SFP+ optics (10GBASE-SR, 10GBASE-LR, 10GBASE-ER, GLC-ZX-SM and Cisco Nexus 2000 Series Fabric Extender Transceiver [FET-10G]) for longer distances. SFP+ has several advantages compared to other 10 Gigabit Ethernet connectivity options:

• Small 10 Gigabit Ethernet form factor
• Optical interoperability with XENPAK, X2, and XFP interface types
• Low power consumption
• Hot-swappable device
• Cisco Nexus 5500 platform products support 8-Gbps Fibre Channel-compatible SFP+ for native Fibre Channel connectivity options; 8-Gbps Fibre Channel-compatible short-reach and 10-km long-reach SFP transceiver modules operate at 8/4/2 Gbps and are supported in the 8-Gbps-capable native Fibre Channel ports on expansion modules and unified ports

Även om vi gör vårt bästa för att ge relevant information, så är bilderna bara till för att ge ett generellt intryck, och själva varan behöver nödvändigtvis inte se ut precis som på bilden. Om det är skillnader mellan produktöverskrift, beskrivning och bild, så är det produktöverskriften som gäller. (tex. Pc:n kommer inte nödvändigtvis med monitor även om bilden visar det) Om något är oklart skicka en e-post till oss före du beställer! Vi förbehåller oss för tryckfel, ändringar av priser och specifikationer utan varsel.