Var god vänta...

Produkten har lagts till i kundvagnen.Se kundvagnen här
– Billigast på över 7000 artiklar i prisjakt!
– Sveriges bästa datorer i PC för ALLA 2011-2013!
– Telefonsupport & egen verkstad!
– Över 20 år i branschen!
DIN KUNDVAGN
TOTALT: 0:-
Töm kundvagnen

Var god vänta...

Routrar & Brandväggar

CISCO
HWIC 2p Gshdsl w/IMA Support

CISCO HWIC 2p Gshdsl w/IMA Support (HWIC-2SHDSL=)

Artikelnr: HWIC-2SHDSL=
6.999:-  [5.599,20 ex moms]
 
Köp
På lager i butik (Spånga): Ej i lager
Hos leverantören: Ej i lager

På lager i butik:– Produkten finns för omgående leverans. Datorpaket har 1-3 dagars leveranstid.

Hos leverantören: Produkten finns på vårt centrallager, beställningsvara upp till 6 dagars leveranstid.

Ej i lager: Produkten finns inte på lager, obekräftad leveranstid.

Preliminärt datum: Produkten förväntas preliminärt angivet datum på centrallagret.

Kontakta oss för mer information: 08-445 77 70
Delbetalning
Betalningsalternativ:
Antal betalningar: 1
Månadskostnad: 7.098:-
Effektiv ränta: 18,36%
Kampanjavgift: 99:-
Adm.avgift / mån: 0:-
Totalbelopp: 7.098:-

Se vad din månadskostnad blir beroende på avbetalningsperiod

Kampanj:
Återbetalningstid: 36
Månadskostnad: 267,41
Läs mer
Skriv ut
Betygsätt
Tipsa en vän
689:- / mnd


Mer info
Beskrivning

G.SHDSL HWICs for Cisco Integrated Services Routers.


Product Number

Description

HWIC-2SHDSL, HWIC-2SHDSL=

2-pair G.SHDSL HWIC (spare & system)

CISCO1841-2SHDSL

1841 2-pair G.SHDSL bundle, HWIC-2SHDSL, IP Base, 64F/128D

C2801-2SHDSL/K9

2801 2-pair G.SHDSL bundle, HWIC-2SHDSL, SP Services, 64F/192D

C2811-2SHDSL/K9

2811 2-pair G.SHDSL bundle, HWIC-2SHDSL, SP Services, 64F/256D

HWIC-4SHDSL, HWIC-4SHDSL=

4-pair G.SHDSL HWIC w IMA (spare & system)

CISCO1841-4SHDSL

1841 4-pair G.SHDSL bundle, HWIC-4SHDSL, IP Base, 64F/128D

C2801-4SHDSL/K9

2801 4-pair G.SHDSL bundle, HWIC-4SHDSL, SP Services, 64F/192D

C2811-4SHDSL/K9

2811 4-pair G.SHDSL bundle, HWIC-4SHDSL, SP Services, 64F/256D

C2821-4SHDSL/K9

2821 4-pair G.SHDSL bundle, HWIC-4SHDSL, SP Services, 64F/256D



Cisco® Integrated Services Routers offer a wide variety of WAN connectivity modules to accommodate the range of application needs in customer networks. The Cisco 2- and 4-Pair Symmetric High-Bit-Rate DSL High-Speed WAN Interface Cards offer G.SHDSL based WAN connectivity for modular routers deployed in small to medium-sized businesses and enterprise branch offices.

The 2-pair (HWIC-2SHDSL) and 4-pair (HWIC-4SHDSL) symmetric high-bit-rate DSL high-speed WAN interface cards (HWICs) provide G.SHDSL connectivity to a Wide Area Network. The 4-pair symmetric G.SHDSL HWIC provides two ports of 4-wire or four ports of 2-wire connectivity options, whereas the 2-pair G.SHDSL HWIC provides two ports of 2-wire or one port of 4-wire connectivity options. The 4-pair symmetric G.SHDSL HWIC also allows bonding single or dual-pair G.SHDSL ports up to a single 8-wire interface with increased bandwidth by using Inverse Multiplexing over ATM (IMA) or data interleaving with M-pair mode. These cards are supported in all integrated services routers that have HWIC slots.

The 2-pair and 4-pair G.SHDSL HWICs supersede the existing G.SHDSL WAN Interface Card (part number WIC-1SHDSL-V3), which is a WIC-based G.SHDSL solution. The two new G.SHDSL HWICs provide higher performance and increased reach when compared to the G.SHDSL WIC.

G.SHDSL technology offers customers high-speed, symmetrical WAN connectivity at a lower monthly cost than traditional WAN circuits. The 2- and 4-pair G.SHDSL HWICs together with Cisco integrated services routers provide businesses the necessary bandwidth for critical traffic such as voice and video conferencing, and enable customers to save money by integrating voice and data traffic on the same WAN link. Service providers can increase subscriber revenue by bundling services and offering differentiated service levels through service-level agreements.

The first standardized multirate symmetric DSL, G.SHDSL has been an accepted worldwide technology standard based on ITU recommendation G.991.2. G.SHDSL is designed to transport rate-adaptive symmetrical data across a single copper pair at data rates up to 2.304 Mbps for a single pair or up to 4.608 Mbps over two pairs. Later enhancements (Annexes F and G) to the G.991.2 specification allow for increased performance up to 5.696 Mbps over a single copper pair. IMA technology allows the 4-pair G.SHDSL HWIC to offer data rates up to 2.304 Mbps per pair and up to 9.2 Mbps over four pairs. These rates cover applications traditionally served by HDSL, SDSL, T1, E1, and services beyond E1.

Feature

  • Based on ITU Recommendation G.991.2
  • Offers symmetrical WAN speeds up to 2.304 Mbps over a single copper pair and up to 4.608 Mbps over two copper pairs using ITU-T G.991.2 Annex A and Annex B
  • Offers symmetrical WAN speeds from 768 kbps to 5.696 Mbps over a single copper pair and from 1.536 to 11.392 Mbps over two copper pairs using ITU-T G.991.2 Annex F and Annex G
  • Offers symmetrical WAN speeds of 2.304 Mbps per pair up to 9.2 Mbps over four pairs on the 4-pair HWIC (part number HWIC-4SHDSL) by bonding with IMA Version 1.1
  • Provides M-pair bonding on the 4-pair HWIC (HWIC-4SHDSL) using Annex F and Annex G with symmetrical WAN speeds of 768 kbps to 5.696 Mbps per pair for M = 2 and 768 kbps to 4.096 Mbps per pair for M = 3 and M = 4
  • Supports Wetting Current (Section A.5.3.3 of G.991.2)
  • Supports G.SHDSL Annex A (U.S. signaling) and Annex B (European signaling)
  • Supports "Dying Gasp" on HWIC-2SHDSL; uses power status bit (section 7.1.2.5.3 of G.991.2) for signaling
  • Offers ability to configure multiple G.SHDSL HWICs per Cisco 1841, 2800, and 3800 Router chassis
  • Provides toll-quality voice over data through ATM Adaptation Layer 5 (AAL5) and voice over IP (VoIP) on the Cisco 1841 ISR and the Cisco 2800 and 3800 Series ISRs; note that embedded voice services with digital signal processors, voice and fax modules are supported only on the Cisco 2800 and 3800 Series ISRs.
  • Offers extensive ATM class-of-service (CoS) and IP quality-of-service (QoS) support
  • Sustains up to 8 permanent virtual circuits (PVCs) per HWIC
  • Provides single RJ-11 connector on 2-pair HWIC (HWIC-2SHDSL) and single RJ-45 connector on 4-pair HWIC (HWIC-4SHDSL)

System Requirements

  • The 2- and 4-pair G.SHDSL HWICs are supported on all modular Cisco Integrated Services Routers: the Cisco 1841, 2801, 2811, 2821, 2851, 3825, and 3845.
  • The 2- and 4-pair G.SHDSL HWICs are supported in all Cisco IOS® Software feature sets.
  • The routers listed previously need to run Cisco IOS Software Special Release 12.4(11)XJ to support the 2- and 4-pair G.SHDSL HWICs. They will also be supported on the Cisco IOS Software Release 12.4(6th)T and later.
  • The system requires no additional flash or DRAM memory other than the specified minimum memory for the previously mentioned Cisco IOS Software releases.
  • The 2- and 4-pair G.SHDSL HWICs can be inserted into any HWIC slot in the integrated services routers.

Features

Features

WIC-1SHDSL-V3

HWIC-2SHDSL

HWIC-4SHDSL

2- and 4-wire support

Yes

Yes

Yes

8-wire support

No

No

Yes

IMA

No

No

Yes

Annex A and Annex B

Yes

Yes

Yes

Annex F and Annex G

No

Yes

Yes

M-pair bonding with Annex F and Annex G

No

No

Yes

Connecter

RJ-11

RJ-11

RJ-45

Dying Gasp

Yes

Yes

No

Wetting Current

Yes

Yes

Yes

Line coding

16-TCPAM

16-TCPAM/32-TCPAM

16-TCPAM/32-TCPAM

G.SHDSL chipset

Conexant

Infineon

Infineon



ATM Features and Benefits of G.SHDSL HWICS

ATM Feature

Benefits

ATM traffic UBR, UBR+, VBR-nrt, VBR-rt, and CBR with traffic shaping

Ensures QoS guarantees for real-time traffic, with ability to send traffic over the appropriate virtual circuit to provide ATM-level shaping and ensure that no head-of-line blocking occurs between circuits of different or equal traffic classes

Up to 8 permanent virtual circuits per HWIC with per-VC (virtual circuit) queuing

Enables more sessions with a rich set of Cisco IOS Software IP QoS features relevant for small and medium-sized businesses and small branch offices with 50 to 200 employees

Point-to-Point Protocol (PPP) over ATM

Ensures compatibility with existing network

F5 OAM Continuity Check (F5OAMCC)

Supports operation, administration, and maintenance support for the use of F5 segment and end-to-end continuity check cells to detect connectivity failures at the ATM layer; Simple Network Management Protocol (SNMP) notifications are generated when virtual-circuit failures are detected

Interim Local Management Interface (ILMI)

Supports setting and capturing ATM-layer and virtual-circuit parameters on ATM interfaces useful for permanent virtual circuit (PVC) autodiscovery

PPP over Ethernet Client

Meets service provider requirements and eliminates the need for additional network software on LAN-connected client PCs

RFC 1483 routing

Supports RFC 1483 routing

ATM oversubscription for DSL

Allows configuration of bandwidth oversubscription for VBR and UBR+ service classes

Multiqueue

For DSL lines, enables a priority and a regular (nonpriority) queue for traffic streams

IMA (only on HWIC-4SHDSL)

ATM Forum standard that provides a scalable and cost-effective way for service provider and end customers to expand WAN bandwidth by bonding one to four G.SHDSL links



Specifications

 

HWIC-2SHDSL

HWIC-4SHDSL

G.SHDSL chipset

Infineon

Infineon

Dimensions

Width: 2.80 inches

Height:.702 inches

Depth: 4.046 inches

Width: 2.80 inches

Height:.702 inches

Depth: 4.046 inches

Firmware Version

Ver 1.1-1.5.0__004

Ver 1.1-1.5.0__004

Weight

0.18 lb

0.22 lb

LEDs

One HWIC OK LED; two Link Status LEDs (one LED per physical link pair)

Link Status LED color coding:

Green-Link On/Active

Off-Link Disabled

Blinking-Link Training/Link Alarm

One HWIC OK LED; four Link status LEDs (one LED per physical link pair)

Link Status LED color coding:

Green-Link On/Active

Off-Link Disabled

Blinking-Link Training/Link Alarm

Ports

Single RJ-11/RJ-14 connector

Single RJ-45 connector

Cabling

RJ-11 line cord

RJ-45 to dual RJ-11 breakout line cord

NEBS compliance

No

No

Även om vi gör vårt bästa för att ge relevant information, så är bilderna bara till för att ge ett generellt intryck, och själva varan behöver nödvändigtvis inte se ut precis som på bilden. Om det är skillnader mellan produktöverskrift, beskrivning och bild, så är det produktöverskriften som gäller. (tex. Pc:n kommer inte nödvändigtvis med monitor även om bilden visar det) Om något är oklart skicka en e-post till oss före du beställer! Vi förbehåller oss för tryckfel, ändringar av priser och specifikationer utan varsel.